manualshive.com logo in svg

Omnia 3, Инструкция по установке и эксплуатации, Страница: 76 / 98

Поделиться
Скачать
Omnia 3 Скачать руководство пользователя страница 76

 

76

og Box              

The Edit Connection Dial

Under the Options Menu, select “Edit Connection”. A new window will open, and a default “New Connection” 

option will be displayed. Enter required information into each of the configuration boxes. 

 

Edit Connection Dialog in Omnia-3 Remote Contr

nnection” window will be the list of any connection

file. Connect.dat will be created in whatever fol

ol 

In the left side of the “Edit Co

s that are currently contained 

in the 'connect.dat' configuration 

der the Omnia remote program 

is started from. The 

entered into the 

CP/IP Ethernet (if optional Ethernet interface is installed in the Omnia-3) 

hernet port or “Dialup” if 

lp keep things tidy if you 

To set up a connection: 

ections you 

create according to the Omnia they connect to, or even by the method of connection. For instance, 

nia by 

sword box, enter the login password for the Omnia-3 that you wish to make a connection 

to. The factory default password is “tomtom” (all lower case).  If you leave the password box 

blank, the Omnia will prompt you for the password each time you try to connect. 

3.

 

Choose either the “COM” or “TCP/IP” radio buttons.  Use “COM” for modem or direct serial 

connections.  If you wish to connect over a network (using the optional Ethernet interface), choose 

“TCP/IP”.  When you do this, the parameters required for the other connection method will be 

grayed out.  You need only supply the parameter required for the selected connection method. 

specific names in the list are derived from the information that was 

“Name:” box when each connection was first set up. In the Properties Window of the dialog box, it's a good 

idea to edit the connection name to match the type of connection you wish to configure. The three available 

connection types are: 

•

 

via Direct Serial 

•

 

via Modem 

•

 

via T

Connection names such as “Serial” if using the RS-232 port, “Network” if using the Et

using a modem may be used. This naming convention is not mandatory, but it will he

decide to use Omnia-3 Remote Control to connect to several Omnia-3 units. 

(Note: Use

 New 

to create additional connection entries. Use 

Delete

 to remove any unused entries. Select any 

entry in the connection list to edit its fields. Use 

Cancel 

to exit without making changes.) 

1.

 

Enter the name of the connection in the “Name” box. It is helpful to name the conn

the name box could contain entries like “WXXX Omnia”, “WYYY Omnia”, “WXXX Om

Modem”, WYYY Omnia by Network”, etc. 

2.

 

In the pas

Содержание 3



































































































Отзывы:

Нет отзывов