SAFETY INSTRUCTIONS
1.
Read All Instructions. All safety and
operating instructions must be read before operating
the product.
2.
Retain All Instructions. All safety and
operating instructions must be retained for future
reference.
3.
Heed All Warnings. All warnings on the
product and those listed in the operating instructions
must be adhered to.
4.
Follow All Instructions. All operating and
product usage instructions must be followed.
5.
Heat. This product must be situated away
from any heat sources such as radiators, heat registers,
stoves, or other products (including power amplifiers)
that produce heat.
6.
Ventilation. Slots and openings in the
product are provided for ventilation. They ensure
reliable operation of the product, keeping it from
overheating. These openings must not be blocked nor
covered during operation. This product should not be
placed into a rack unless proper ventilation is provided
through following the manufacturer’s recommended
installation procedures.
7.
Water and Moisture. Do not use this
product near water—for example; near a bath tub,
wash bowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool or the like.
8.
Attachments. Do not use any attachments
not recommended by the product manufacturer as they
may cause hazards.
9.
Power Sources. This product must be
operated from the type of power source indicated on
the marking label and in the installation instructions. If
you are not sure of the type of power supplied to your
facility, consult your local power company.
10.
Grounding and Polarization. This product is
equipped with a polarized AC plug with integral safety
ground pin. Do not defeat the safety ground in any
manner.
11.
Power Cord Protection. Power supply cords
must be routed so that they are not likely to be walked
on nor pinched by items placed upon or against them.
Pay particular attention to the cords at AC wall plugs
and convenience receptacles, and at the point where
the cord plugs into the product.
12.
Lightning. For added protection for this
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the AC wall outlet. This will prevent
damage to the product due to lightning and power line
surges.
13.
Overloading. Do not overload AC wall
outlets, extension cords, or integral convenience
outlets as this can result in a fire or electric shock
hazard.
14.
Object and Liquid Entry. Never push
objects of any kind into this product through openings
as they may touch dangerous voltage points or short-
out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
15.
Accessories. Do not place this product on
an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious damage to a child or
adult, and serious damage to the product. Any
mounting of the product needs to follow
manufacturer’s installation instructions.
16.
A Product and Cart Combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and the cart
combination to overturn.
17.
Servicing. Refer all servicing to qualified
servicing personnel.
18.
Damage Requiring Service. Unplug this
product from the wall AC outlet and refer servicing to
qualified service personnel under the following
conditions:
a.
When the AC cord or plug is damaged.
b.
If liquid has been spilled or objects have
fallen into the product.
c.
If the product has been exposed to rain or
water.
d.
If the product does not operate normally
(following operating instructions).
e.
If the product has been dropped or damaged
in any way.
f.
When the product exhibits a distinct change
in performance. This indicates a need for
service.
19.
Replacement Parts. When replacement parts
are required, be sure the service technician has used
replacement parts specified by the manufacturer or
that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
20.
Safety Check. Upon completion of any
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
21.
Cleaning. Do not use liquid cleaners or
aerosol cleaners. Use only a damp cloth for cleaning.
