Omega Engineering OMB-CHARTSCAN 1400, Руководство пользователя

Страница: 74 / 273

4-18 ChartView Software Reference ChartScan User’s Manual
Display config. Allows you to: Open a previously saved display configuration file, save the current
display configuration file, or save the current display configuration file in a different
location (or under a different file name). (See following note).
Note: There will be no default Display Configuration file present the first time ChartView is
started. In this case, Chart Setup Wizard activates, allowing you to create a display
setup. When ChartView is shutdown, the display configuration is automatically saved in
a default configuration file that will load upon the next startup of ChartView .
If the default display configuration becomes corrupt, or if you would like to bypass this
configuration when starting
ChartView , you can hold down the Control Key when
starting ChartView . This causes the program to ignore the default display configuration
and await your creation of a new display.
Start F5
Stop F6
Pause F7 Starts, stops, or pauses chart scrolling.
Next Group Ctrl+G Selects the next chart group in the display configuration.
Faster Ctrl+Z
Slower Ctrl+X
Used to alter the chart scrolling speed. There are fourteen possible chart speeds. The
range of speeds is from 0.1 sec/div to 1.0 hr/div.
Zoom
[ Restore ] Zoom causes the Main Window to display one chart only. For example, if you were
viewing 3 charts and desired to get a better view of Chart 2, you could use Zoom to
view Chart 2 using the full chart viewing area, as compared to using one third of the
area. The zoom feature can also be invoked by double-clicking in the chart region of
the chart you want to apply the zoom to.
Once you have zoomed in on a chart, the pull-down menu Zoom option is replaced by a
Restore option. Selecting Restore from the menu will return the main window to its
previous multiple chart viewing status. The restore feature can also be invoked by
again double-clicking in the chart region.
Grid limit lines
Off Ctrl+F1
Solid Ctrl+F2
Dots Ctrl+F3
Allows you to turn the chart’s grid limit lines (items 13 & 19) on or off. If “on”, you can
have the grid lines appear as solid or dots.
Timestamp
Absolute Ctrl+F4
Relative Ctrl+F5
Allows you to select an Absolute or Relative style of timestamp.
View
Toolbar
A 9 by Toolbar indicates the toolbar will be visible. The absence of the 9 indicates the
visible toolbar option is not chosen, and in this case will not appear on the Main Window.
Use the mouse to select or de-select the toolbar option.
Timestamps &
Chartspeed A 9 by Timestamps & Chartspeed indicates the options are selectable and visible. The
absence of the 9 indicates the timestamp/chartspeed option is not chosen, and therefor
not visible on the Main Window. Use the mouse to select or de-select this option.
Statusbar
A 9 by Statusbar indicates the Status Message Box and Status LEDs are visible (items
22 and 24, page 4-5). The absence of the 9 indicates the status bar will not be visible
on the Main Window. Use the mouse to select or de-select this option.