Olympus VISERA ENF-V2, Инструкция по эксплуатации, Страница: 13 / 90

Important Information — Please Read Before Use
9
VISERA RHINO-LARYNGO VIDEOSCOPE ENF-V2
• Do not insert the video connector while the electrical contacts
are wet and/or dirty. The endoscopic image may not be
visible.
• Turn the video system center OFF before connecting or
disconnecting the video connector to/from the video system
center. Turn it ON or OFF only when the video connector is
connected to the video system center. Failure to do so can
result in equipment damage, including destruction of the
CCD chip.
• The endoscope’s remote switches cannot be removed from
the control section. Pressing or pulling them with excessive
force can break the switches and/or may cause water leaks.
• Do not attempt to bend the endoscope’s insertion tube with
excessive force. Otherwise, the insertion tube may be
damaged.
• To check the electromagnetic influence from other equipment
(any equipment other than this instrument or the components
that constitute this system), the system should be observed
to verify its normal operation in the configuration in which it
will be used.
• Electromagnetic interference may occur in the vicinity of
equipment marked with the following symbol, or portable and
mobile RF communications equipment.
• Be sure that this instrument is not used adjacent to or
stacked with other equipment (other than the components of
this instrument or system) to avoid electromagnetic
interference.
It is highly desirable that a backup endoscope be available to
continue clinical procedures in case of a malfunction.