Olympus MAJ-2308 Скачать руководство пользователя страница 67

Страница: 67 / 120

4.2 User presets

MAJ-2308 INSTRUCTION MANUAL

Ch.4



Setting the data display on the observation monitor

Select the data display to be displayed on the observation monitor from the settings listed in the
following table.

Table 4.16

NOTE

• The setting performed here is not only applied to the IR/BL imaging mode but also

to all imaging modes including the WLI mode. Therefore, it should be set in full
consideration of the possibility of use in imaging modes other than the IR/BL
imaging mode.

• Even when “ON” is selected here, the data display is not displayed in the following

cases.



WLI mode



Digital zoom ratio “× 1.0”

• When “ON” is set here, the IR/BL icon is displayed on the observation monitor

during IR/BL imaging and also recorded in the recorded image.

Setting

Description

“Observation mode indication”, “Digital zoom ratio indication”, and
“Recording indicator” are displayed on the observation monitor.

OFF

No information is displayed except for “Digital zoom ratio
indication”.

Tap the “Settings” button.

Figure 4.76

Settings

Содержание MAJ-2308

























































































































Результаты поиска

Содержание MAJ-2308

Отзывы:

Olympus MAJ-2308, Инструкция по эксплуатации, Страница: 67 / 120

Результаты поиска

Содержание MAJ-2308

Отзывы: