Olympus MAJ-2308 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 120

Olympus MAJ-2308 Скачать руководство пользователя страница 11

Important Information — Please Read Before Use

7

MAJ-2308 INSTRUCTION MANUAL

WARNING

• This instrument should be used under the conditions specified in “



Environment”

on page 107. Otherwise, imperilment of safety or failure of equipment may result as
well as malfunction.

• The information obtained with IR and BL imaging is merely reference information.

Be sure to perform a comprehensive observation of all required regions by also
using the WLI observation.

• This product may interfere with other medical electric equipment used in

combination with it. Before use, refer to “Appendix” to confirm the compatibility of
this instrument with all equipment to be used.

CAUTION

• Do not use this instrument in any place where it may be subject to strong

electromagnetic radiation (for example, in the vicinity of a microwave therapeutic
equipment, MRI, wireless set, short-wave therapeutic equipment, cellular/portable
phone, etc.). This may impair the performance of this instrument.

• Do not use this instrument in any place with strong magnetic force, or bring

magnetized equipment or magnets closer. This may impair the performance of this
instrument.

• Do not push any part of this instrument with a sharp of hard object. Otherwise,

equipment damage or failure may result.

• Connect various connectors in a dry state without contamination of electrical

contacts. Also, do not touch the electrical contacts inside the connector directly. If
the electrical contacts are dirty or used under wet conditions, the equipment may
malfunction.

• Electromagnetic interference may occur on this instrument near equipment marked

with the following symbol or other portable and mobile RF (Radio Frequency)
communications equipment such as cellular phones. If electromagnetic
interference occurs, mitigation measures may be necessary, such as reorienting or
relocating this instrument, or shielding the location.

«
...
9
10
11
12
13
...
»

Содержание MAJ-2308

























































































































Отзывы:

Нет отзывов