Olympus MAJ-2308, Инструкция по эксплуатации, Страница: 56 / 120

52
4.2 User presets
MAJ-2308 INSTRUCTION MANUAL
Ch.4

Setting the BL AGC MAX gain
Select the BL AGC MAX gain from the settings listed in the following table.
In advance, be sure to perform the procedure in “

Opening the BL image adjustment screen”
on page 49.
Table 4.11
NOTE
Although the image becomes brighter by increasing the BL AGC MAX gain when
the image is dark, the noise in image may become noticeable.
3
Tap the “Save” button to finish the BL
brightness setting. If you wish to set another
item, proceed to its setting instead of tapping
the “Save” button.
Figure 4.50
4
Tap the “Back” button to finish the user presets.
If you wish to change other user presets,
proceed to their settings instead of tapping the
“Back” button.
Figure 4.51
Description Setting
3 dB, 6 dB, 9 dB,
12 dB, 18 dB, 27 dB Set the upper limit value to electrically increase the brightness of
the BL image when the image is dark. A larger value increases
the brightness.
Save
Back