Olympus AL120-6Series Скачать руководство пользователя страница 54

Страница: 54 / 66

Test Programs

Maintenance Manual

3-24

Page

Test No./
Test Name

Function Outline

•

Transfer speed <Speed> SP1 to SP5

A-arm horizontal speed

<A-arm linier speed> ..................... High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

A-arm rotation speed

<A-arm rotation speed> ................. High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

A-arm vertical speed

<A-arm up down speed> ............... High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

L-arm horizontal speed

<L-arm rotation speed>.................. High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

Macro table rotation speed <Macro table rotation speed> ........ High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

L-arm vertical speed

<L-arm up down speed> ................ High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

Macro table vertical speed <Macro table up down speed>....... High speed <Fast> / Medium speed <Middle> / Low speed <Slow>

No. 25

Contact
Centering
open/close
movement
check

<Contact centering open/close check>
The movement can be checked only if the optional AL120-CC is mounted.
Open and Close are switched between each time the [Start] button is pressed.

No. 26
Software
version
and
error log
display

This program can be used to check the software version and the history of error occurrences.

The software version or error log displayed can be cleared and the error log date can be set by

manipulating the menu buttons on the liquid crystal panel.

[M1]: Clear <Clear>

[M2]: Set date <Date>

[M3]: Go to the previous page <PageUp>

[M4]: Go to the next page <PageDn>

Move the cursor using the 4-way buttons [UP], [DOWN], [RIGHT] and [LEFT].

Press the [Start] button.

The software version and error log are displayed on the liquid crystal panel.

[M1]: Press the <Clear> button and then the [Start] button to delete the error log

Software version <Ver.>: 01.00

Error code display:

Error code <Code>: Refer to the Operation Manual for error code details.

Sequence in which the error occurred <Seq>: Number of the sequence in which the error occurred

Step in which the error occurred <Step>: Number of the step in which the error occurred

Date and time of error occurrence <Date><Time>

•

Press the[Quit] button to quit this program.

•

Up to ten errors are recorded in the error log.

•

Data is cleared after the loader has remained off for continuous two weeks.

•

If the date has been cleared, use [M2]: <Date> to set the date.

•

To output the error log in text format, use the specially designed maintenance software for use with

a PC

Содержание AL120-6Series



































































Результаты поиска

Содержание AL120-6Series

Отзывы:

Olympus AL120-6Series, Руководство по обслуживанию, Страница: 54 / 66

Результаты поиска

Содержание AL120-6Series

Отзывы: