Olympus AL120-6Series, Руководство по обслуживанию, Страница: 36 / 66

Test Programs Maintenance Manual
3-6
Page
Test No./
Test Name
Function Outline
<L-arm rotation check>
Do not continue the operation for longer than 5 minutes. Wait for longer than
one minute before restarting the operation.
This program can be used to check the L-arm rotation.
Press the [Start] button. If the loader has not been initialized, initialization starts.
Select the operation speed using the menu buttons on the liquid crystal panel.
[M1]: High speed <Fast speed> [M2]: Medium speed <Middle speed> [M3]: Low speed <Slow
speed>
•
If you do not specify anything here, the loader will operate at the high speed [M1]: High speed
<Fast speed> setting.
No. 7
L-arm
rotation
check
Press the [Start] button and the loader starts the operation.
Raises the L-arm Rotates the L-arm to registered position 1
Rotates the L-arm when the rotation button is pressed
•
Press the button for registering the tilt position [Memory 1] or
[Memory 2], and the L-arm rotates and stops at the registered
position.
•
By pressing and holding down the button [Memory 1] or [Memory
2] for registering the tilt position, you can register the position
where the L-arm is presently located.
By pressing the [M4]: <Return L-arm to registered tilt angle
position>, you can make the L-arm return to the initially registered
tilt position.
•
The speed can be changed during the pause.
•
When an error occurs, the loader displays the same error code
as in the regular operation, and then stops.
•
Press the [Quit] button, and the L-arm returns to its initial
position and the loader stops the operation.
To save the registered position, press the button [Memory 1] or
[Memory 2] for registering the tilt position.