Olympus AL120-6Series Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 66

Olympus AL120-6Series Скачать руководство пользователя страница 53

Maintenance Manual

Test Programs

3-23

Page

Test No./
Test Name

Function Outline

No. 24
Wafer
type
setting

<Inspection wafer classification setting>

This program can be used to register wafer types, and set and change the size, thickness and transfer

speed for each wafer type.

Press the [Start] button.
The registered wafer types are displayed on the liquid crystal panel.

Specify the item to modify or add, and press the 4-way button [RIGHT].

•

Modify: Move the <

×

> to the item to modify by using the 4-way button.

•

Add: Move the <

×

> to the item to add by using the 4-way button.

Move to the setting item by using the 4-way button, and change the value by using the up and down
buttons.

Move to the comment item by using the 4-way button, and changes into the comment input

screen in the [M3] button <Edit>.

Settable items

•

Wafer size <Size>

:200/150/125/100/---

Normally, the wafer size can be set to any size appropriate for your wafer loading operation.
Standard settings: 150 for AL120-6 series, 200 for AL120-8 series

•

When chose ---, the set point is deleted, and it is not displayed to a wafer type screen at the time of

the inspection.

•

Wafer thickness <Thick>

・

Wafer size <Size>150/125/100mm

：

675-400/400-150

・

Wafer size <Size>200mm

：

725-400/400-180/180-90

* Wafer size and thickness settings may be unavailable, depending on the loader specifications.

•

Transfer speed <Speed>

:Fast/Middle/Slow/SP1

–

SP5

SP1 to SP5 can be set to desired speeds for each axis.

Optional speed is limited as follows by wafer thickness <Thick>.

725-400 ...................................：Fast/Middle/Slow/SP1～SP5      Normal setting<Fast>
400-180 ...................................：Middle/Slow/SP1～SP5            Normal setting <Middle>
180-90 ......................................：Slow/SP1～SP5                            Normal setting <Slow>

•

Comment <Comment> ----------- :

A-Z, a-z, 1 to 0, space

[M1]：Decision<OK> [M2]：Cancel<Cancel> [M3]：Back space<BkSpace> [M4]：Exchange<Change>

Capital letter input.....  [No.1～No.26]：Input of A to Z
Small letter input ........  [No.1～No.26]：Input of a to z
Number input ................  [No.1～No.9]：Input  of  1  to  9,  [No.10]：Input  of  0,  [No.11]：Input  of  －,  [No.12～
No.26]：Input of space

Capital letter input, small letter input, number input are replaced whenever they push [M4]：Exchange
<Change>.

Up to 16 characters can be entered. An input is possible even if it uses PC and the specially

designed maintenance software.

4-way button [UP], [DOWN]: Change the set value of each item

4-way button [LEFT], [RIGHT]: Change the setting item
[M1]: Register <Save>
[M2]: Cancel <Cancel>
[M3]: Detailed settings
When the transfer speed <Speed> is set to SP1 to SP5, press [M3] button <Detail> to open the
detailed setting screen.
When the Comment <Comment> is [M3] button <Edit> to open the comment input screen.

«
...
51
52
53
54
55
...
»

Содержание AL120-6Series



































































Отзывы:

Нет отзывов