manualshive.com logo in svg

Olympus AL120-6Series, Руководство по обслуживанию, Страница: 30 / 66

Поделиться
Скачать
Olympus AL120-6Series Скачать руководство пользователя страница 30

Adjustments

 

Maintenance manual 

 

 

 

2-6 

Specify the elevator height by using Test 11. 

  Press the Wafer No. selector button [11], then press the [Start] button. 

No |Size |Thick 

|Speed  |comment    

x1  | 200 |725-400  |High 

| 

 2 | 200 |725-400 |High  

|  

  3  | 200 |725-400  |High 

|   

  4  | 200 |725-400  |High 

|   

  5  | 200 |725-400  |High 

|   

  6  | 200 |725-400  |High 

|   

OK        Cancel    PageUp    PageDn 

M1:Wafer position setting 
M2: A-E position search   
 
 
 
 
Hight  A-E 

M1:Vacuum ON/OFF 
M2:Put a wafer on a A-arm 
M3:Save 
UP:Elevator 0.1mm UP 
DOWN:Elevator 0.1mm DOWN 
 
 
Vacuum      WEF ON    Save 

  The menu appears on the liquid crystal panel. 

Execute [M1]: Wafer removal height adjustment <Wafer position setting>. 
Press the [M1] button <Height>. 

 

  The wafer types currently registered are displayed on the liquid crystal 

panel. 
Using the 4-way button, move the <x> to the item to add, then press the 
[M1] button <Ok>. 

 

  Insert wafers to be registered into all slots of the cassette, and set the 

cassette in the cassette table. 

 

 

Using the Wafer No. selector button [13], specify the 13th slot and press 
the [Start] button. 
The elevator goes down and stops at the specified removal height. 

 

 

The A-arm goes up and the horizontal excitation turns OFF. 

 

 

Insert the A-arm into the cassette manually. 

 

  Make fine adjustments of the arm insertion height. The elevator 

movement can be selected by using the 4-way button on the liquid crystal 
panel. 
[UP]: Moves the elevator slightly up <UP: Elevator 0.1mm UP> 
[DOWN]: Moves the elevator slightly down <DOWN: Elevator 0.1mm 
DOWN> 
Adjust the elevator height so that the arm is inserted between the wafer 
to be removed (13th) and the wafer below it (12th). 

 

  Press the [M3]: Registration button <Save> to register the adjusted 

value. 

 

 

Make fine adjustments of the wafer removal height. 

 

Insert the A-arm into the cassette manually. 
Switch the elevator movement using the menu buttons on the liquid 
crystal panel. 

 

Press the [M2]: Removal height button <Put a wafer on a A-arm> to 
move the elevator down to the removal height. 

 

Turn ON the [M1]: A-arm adsorption button. 

 

Elevator movement can be selected by using the 4-way button on the 
liquid crystal panel. 

 

[UP]: Moves the elevator slightly up <UP: Elevator 0.1mm UP> 

 

[DOWN]: Moves the elevator slightly down <DOWN: Elevator 0.1mm 
DOWN>  
Adjust the elevator height so that the outer circumference of the 
adsorbed wafer is positioned at the center of the cassette slot. 

 

11

  Press the [M3]: Registration button <Save> to register the adjusted 

value. 

 

12

 

Check the states of the 2nd and 25th wafers in the same way. 

6) 

Termination of adjustment test mode 

Turn the main switch OFF to terminate test mode. 

Page 

Содержание AL120-6Series



































































Отзывы:

Нет отзывов