Olympus AL120-6Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 66

Olympus AL120-6Series Скачать руководство пользователя страница 39

Maintenance Manual

Test Programs

3-9

Page

Test No./
Test Name

Function Outline

<Elevator height check>
This program can be used to check and adjust the elevator height.

Press the [Start] button. If the loader has not been initialized, initialization starts.
Select the item to adjust by using the menu buttons on the liquid crystal panel.
[M1]: Adjust the wafer removal height <Height setting>
[M2]: Adjust the A-arm and elevator height reference value <A-E position search>

No. 11
Elevator
height
adjustment

[M1]: Adjust the wafer removal height <Height setting>
Using the 4-way button, select the number of the wafer type to adjust or register from the list of wafer
type numbers displayed on the liquid crystal panel, and then press the [Start] button.

Insert the wafer to set into the cassette slot. (Initially, insert the wafer into the 12th, 13th or 14th

slot from the bottom.)

Put the cassette on the elevator.

Using the Wafer No. selector button, specify the slot to which the wafer for adjustment was

inserted. (Initially, specify 13.)

Press the [Start] button.

The elevator moves down and stops at the specified removal height.

The A-arm moves up and the horizontal excitation turns OFF.

Manually insert the A-arm into the cassette.

You can select an operation from the menu buttons on the liquid crystal panel to then confirm or adjust
the settings.
[M1]: Turn the vacuum ON for the A-arm <Vacuum

ON

OFF>

[M2]: Alternate between the elevator height, removal height, and arm insertion height

<Put a wafer on a A-arm>

[M3]: Register <Save>
[M4]: Specify a different slot <Change slot>
[Pause]: Replace the A1-arm with the A2-arm or vice versa.

Confirm the arm insertion height or make fine adjustments. Elevator movement can be selected by

using the 4-way button on the liquid crystal panel.

[UP]: Raise the elevator slightly <UP: Elevator 0.1 mm UP>

[DOWN]: Lower the elevator slightly <DOWN: Elevator 0.1 mm DOWN>

Register the adjusted value.

[M3]: Register <Save>

Confirm the wafer removal height or make fine adjustments.

Switch the elevator operation by using the menu buttons on the liquid crystal panel.

Press the [M1] button to turn on the vacuum for the A-arm <Vacuum>

Press the [M2] <Put a wafer on A-arm> to move the elevator to the wafer removal height.

The elevator movement can be selected by using the 4-way button on the liquid crystal panel.

[UP]: Raise the elevator slightly <UP: Elevator 0.1 mm UP>

[DOWN]: Lower the elevator slightly <DOWN: Elevator 0.1 mm DOWN>

11

Register the adjusted value.

[M3]: Register <Save>

12

When a wafer is chucked by the vacuum, press the [M1] button to turn the vacuum OFF for the

A-arm.

13

Press the [M2] button <Put a wafer on A-arm> to raise the elevator to the A-arm insertion height.

•

When the [Quit] button is pressed, wafer removal height adjustments are finished and each part is

initialized.

•

When the [M4] button is pressed, and you are brought back to

and can specify a different slot.

«
...
37
38
39
40
41
...
»

Содержание AL120-6Series



































































Отзывы:

Нет отзывов