User’s Guide
95
connected apparatus and the PSTN.
Difficulties may occasionally be experienced when making calls from
other apparatus connected to the PSTN via the series apparatus. Such
difficulties may include:
(i)
Difficulty in making calls
(ii) Problems in telephone conversion being experienced by both parties
to the call
(iii) Such that any apparatus which forms part of the RBS or is connected
via it, is so connected that no signals of any kind may be conveyed
between that apparatus and a PSTN circuit or vice-versa, except by
means of other apparatus that does not materially affect the electrical
conditions presented to one another by that apparatus and the PSTN.
Further information is contained in the proposed British Standard for
RBS to PSTN lines.
TEL/FAX Change Over (UK only)
When the OKIOFFICE 84 is in changeover mode, care must be taken to
ensure that you only connect the apparatus to telephone lines not listed
in the telephone directories issued by the Public Telephone Network
Operators.
The telephone number of this apparatus should not be issued to other
parties without instructions concerning the correct method of making
calls to this apparatus.
While operation may be possible initially, changes to or modernisation
of the network taking place in the normal course of events may result in
the apparatus being connected to a network service with which it was
not designed to be compatible. Failure of the apparatus to work under
these circumstances may not be the responsibility of the network operator.
If such difficulties are experienced, please consult your OKIOFFICE
supplier.
NOTE 2
A relevant branch system (RBS) is a telecommunication system other
than a public telecommunication system that is:-
(i)
Run under a license granted or having effect under section 7 of the
Telecommunications Act 1984.
(ii) Connected to one or more PSTN lines.
Line Socket Installation (UK only)
To request the installation of a socket for the connection of your
OKIOFFICE 84 to the telephone network, you should send a postcard
containing the following information to your local BT Sales Office:
1)
The model no. of your fax machine:
OKIOFFICE 84
2)
The approval no. of your fax machine: BABT 609072.
3)
The number of extension sockets you require.
4)
Your name, address and telephone number.
5)
The card should be signed and dated.
Note: If your wiring does not belong to British Telecom, then it
is not necessary to apply to BT for socket installation.
Содержание OKIOFFICE 84
Страница 1: ...User s Guide OKIOFFICE84...
Страница 14: ...14 OKIOFFICE 84 Control Panel...
