64
OKIOFFICE 84
telephone rings, when the telephone handset is lifted, or when
a document is loaded. Available settings are on and off.
Note: If you have purchased the optional MFP software
and you have connected your machine to a PC, it is
recommended that you turn
18:POWER SAVE MODE
off. Your PC cannot switch your machine back to full
operation.
19:ECM FUNCTION
19:ECM FUNCTION
19:ECM FUNCTION
19:ECM FUNCTION
19:ECM FUNCTION
- The error correction mode function
helps your machine to improve communication in areas where
telephone line conditions are poor. Available settings are on
and off.
Note: When using ECM, the transmitting machine
automatically checks the data as it is sent. If the receiving
machine cannot verify the transmission, the transmitting
machine will retransmit as necessary. Using ECM also
increases transmission time because the data is checked
as it is transmitted.
20:REMOTE DIAGNOSIS
20:REMOTE DIAGNOSIS
20:REMOTE DIAGNOSIS
20:REMOTE DIAGNOSIS
20:REMOTE DIAGNOSIS
- The remote diagnostics feature
allows a service person to remotely dial and service your
machine. Available settings are on and off.
21:PC/FAX SWITCH
21:PC/FAX SWITCH
21:PC/FAX SWITCH
21:PC/FAX SWITCH
21:PC/FAX SWITCH
- When your machine is set to answer
in PC Receive Mode and your MFP software is set to receive
fax messages, all incoming calls are transferred directly to your
PC. However, if you are experiencing a problem with your PC,
you can tell your machine to receive and print faxes locally by
setting this function to on. Available settings are on and off.
22:NO TONER MEM. RX
22:NO TONER MEM. RX
22:NO TONER MEM. RX
22:NO TONER MEM. RX
22:NO TONER MEM. RX
- With this function turned on,
your machine automatically receives and stores messages in its
memory when it the toner is low. When turned off, messages
print even if toner is low or empty. Available settings are on and
off.
Note: The off setting allows time for you to replace the
toner cartridge, but quality of printing may become poor
as the toner cartridge is exhausted.
23:MEM. FULL SAVE
23:MEM. FULL SAVE
23:MEM. FULL SAVE
23:MEM. FULL SAVE
23:MEM. FULL SAVE
- With single location transmission
and
17:MEM./FEEDER SW.
set to
MEM
and
25:INSTANT
DIALLING
is set to off, and with multiple location transmission,
call origination starts after an entire document is read into
memory. If during this process memory becomes full, a
MEMORY
OVERFLOW
message is shown in the display and the display
changes to:
S E N D S C A N N E D P A G E S
S E N D S C A N N E D P A G E S
S E N D S C A N N E D P A G E S
S E N D S C A N N E D P A G E S
S E N D S C A N N E D P A G E S
Y E S (
Y E S (
Y E S (
Y E S (
Y E S (
ß
ß
ß
ß
ß
) N O (
) N O (
) N O (
) N O (
) N O (
à
à
à
à
à
)
)
)
)
)
Press the
NO
õ
key, your machine gives an alarm, the scanning
of your document stops and the display shows:
M E M O R Y O V E R F L O W
M E M O R Y O V E R F L O W
M E M O R Y O V E R F L O W
M E M O R Y O V E R F L O W
M E M O R Y O V E R F L O W
R E F E R T O U S E R G U I D E
R E F E R T O U S E R G U I D E
R E F E R T O U S E R G U I D E
R E F E R T O U S E R G U I D E
R E F E R T O U S E R G U I D E
Press the
STOP
key and the remaining pages of your document
are removed from your machine. The pages of your document
that were scanned into memory are automatically deleted from
the memory.
Содержание OKIOFFICE 84
Страница 1: ...User s Guide OKIOFFICE84...
Страница 14: ...14 OKIOFFICE 84 Control Panel...