User’s Guide
85
2.
Press the
COUNTER DISPLAY
One Touch key. The
display shows:
D R U M C O U N T
D R U M C O U N T
D R U M C O U N T
D R U M C O U N T
D R U M C O U N T
C L E A R (
C L E A R (
C L E A R (
C L E A R (
C L E A R (
ß
ß
ß
ß
ß
) N E X T (
) N E X T (
) N E X T (
) N E X T (
) N E X T (
à
à
à
à
à
)
)
)
)
)
3.
Press the
NO
õ
key. The display shows the
PRINT COUNT
.
4.
Press the
NO
õ
key again. The display shows the
SCAN
COUNT
.
5.
Press the
SELECT FUNCTION
key to finish.
Shipping the Machine
When shipping the machine once it has been in use, please
follow the re-packaging procedure below:
1.
Remove the image drum unit with toner cartridge from the
machine.
2.
Place the image drum unit with toner cartridge still attached
into a black plastic bag and keeping it away from direct
sunlight.
3.
Re-package the machine and the image drum unit separately
into packaging material and a shipping carton.
Caution: DO NOT ship the machine with the image drum
unit installed unless it is a new machine and has never
been used.
Problem Checklist
Your machine is a complex machine with many features and
functions which allow it to operate in different ways. Many
problems you experience may be due to improper programming.
If you are experiencing a problem, read through the list of
problems and solutions before calling your dealer.
Your telephone does not ring if your machine is set tel/fax
answering mode and the incoming call is a voice call. This is
normal. In the tel/fax answering mode, your machine answers
the incoming call and detects if the call is a voice call or a fax
call. If the call is a voice call, your machine will ring, but your
telephone will remain silent. It is recommended that you only
use tel/fax answering mode if your telephone is located near
the machine.
The display is blank. Check the power cable to make sure that it is
firmly connected. Check your wall outlet to make sure that it has
power.
Nothing happens when you press the control panel keys. Turn
the machine off, wait 10 seconds, then turn it on again.
The display tells you to replace paper even though there is
paper in the paper tray. Make sure that the paper is correctly
stacked in the tray. Check for a paper jam in the machine.
Your documents jam. Check the document for wrinkles, tears
or other damage. Make sure there are no staples or paper clips
and that the paper is clean and dry. Make sure the document is
not wider than your machine can load. Try making a copy of
the document on a photocopier and faxing the copy.
Содержание OKIOFFICE 84
Страница 1: ...User s Guide OKIOFFICE84...
Страница 14: ...14 OKIOFFICE 84 Control Panel...
