72
OKIOFFICE 84
pulses to dial a number (like a rotary telephone). MF, or multi-
frequency dialling (touch tone), uses different tones to dial a
number. Available settings are MF and DP.
PULSE DIAL RATE:
PULSE DIAL RATE:
PULSE DIAL RATE:
PULSE DIAL RATE:
PULSE DIAL RATE:
If your machine is set to pulse dialling,
this function controls how quickly your machine sends out
dialling pulses (the dial pulse rate varies in different countries).
Available settings are 10 pps, 16 pps and 20 pps.
PULSE MAKE RATIO:
PULSE MAKE RATIO:
PULSE MAKE RATIO:
PULSE MAKE RATIO:
PULSE MAKE RATIO:
Available settings are 33% and
39%.
PULSE DIAL TYPE:
PULSE DIAL TYPE:
PULSE DIAL TYPE:
PULSE DIAL TYPE:
PULSE DIAL TYPE:
If your machine is set to pulse dialling,
this function controls the type of pulse dialling used (different
types of pulse dialling are used in different countries). Available
settings are N, 10-N and N+.
MF(TONE) DURATION:
MF(TONE) DURATION:
MF(TONE) DURATION:
MF(TONE) DURATION:
MF(TONE) DURATION:
If your machine is set to tone
dialling, this function controls the duration of the tones used
for dialling (the tone duration varies in different countries).
Available settings are 75 ms, 85 ms, and 100 ms.
P B X L I N E :
P B X L I N E :
P B X L I N E :
P B X L I N E :
P B X L I N E :
Turn this function on if your machine is
connected to a PBX. Once this function has been turned on and
the dial prefix function has been programmed, your machine
will recognize the dial prefix number you use in your PBX to
get an outside line. After it dials your dial prefix number, your
machine pauses to wait for an outside line before dialling the
rest of the telephone number. Available settings are on and off.
See Connecting to a PBX in the Installation chapter for
instructions on changing this setting.
FLASH/EARTH/NORMAL:
FLASH/EARTH/NORMAL:
FLASH/EARTH/NORMAL:
FLASH/EARTH/NORMAL:
FLASH/EARTH/NORMAL:
If your machine is connected
to a PBX, this function tells your machine about the type of
PBX line your machine if connected to. Available settings are
normal (N), flash (F) and earth (E).
AUTO START:
AUTO START:
AUTO START:
AUTO START:
AUTO START:
When this function is turned on, your machine
automatically begins dialling as soon as you have selected a
location by pressing a One Touch key or entering an
AUTO
DIAL
code. You do not have to press the
START
key. Available
settings are on and off.
DIAL PREFIX:
DIAL PREFIX:
DIAL PREFIX:
DIAL PREFIX:
DIAL PREFIX:
If your machine is connected to a PBX, use
this function to tell your machine what access number is used
to obtain an outside line from your PBX. You can enter up to 4
digits. See Connecting to a PBX in Installation for instructions
on changing this setting.
Changing Dial Parameter Settings
1.
Press the
SELECT FUNCTION
key.
2.
Press the
USER PROG
One Touch key. The display shows:
1 : F U N C . P R O G R A M M I N G
1 : F U N C . P R O G R A M M I N G
1 : F U N C . P R O G R A M M I N G
1 : F U N C . P R O G R A M M I N G
1 : F U N C . P R O G R A M M I N G
Y E S (
Y E S (
Y E S (
Y E S (
Y E S (
ß
ß
ß
ß
ß
) N O (
) N O (
) N O (
) N O (
) N O (
à
à
à
à
à
/ 1 - 7 )
/ 1 - 7 )
/ 1 - 7 )
/ 1 - 7 )
/ 1 - 7 )
3.
Using the numeric keypad, press number 2. The display
shows:
2 : D I A L P A R A M E T E R
2 : D I A L P A R A M E T E R
2 : D I A L P A R A M E T E R
2 : D I A L P A R A M E T E R
2 : D I A L P A R A M E T E R
Y E S (
Y E S (
Y E S (
Y E S (
Y E S (
ß
ß
ß
ß
ß
) N O (
) N O (
) N O (
) N O (
) N O (
à
à
à
à
à
/ 1 - 7 )
/ 1 - 7 )
/ 1 - 7 )
/ 1 - 7 )
/ 1 - 7 )
4.
Press the
ô
YES
key until the display shows the dial
parameter you want to change.
Содержание OKIOFFICE 84
Страница 1: ...User s Guide OKIOFFICE84...
Страница 14: ...14 OKIOFFICE 84 Control Panel...
