Oki OKIOFFICE 84, Руководство пользователя

Страница: 61 / 96

User’s Guide 61
PROGRAMMING
Customizing Features & Operations
Many features and functions of your machine have settings
which can be changed to customize the operations of your
machine. Because each country has different regulations, you
may not be able to access all of the settings listed below. If you
have trouble changing a setting, contact your dealer for
assistance.
Viewing Your Current Settings
Follow these instructions to obtain a configuration report
showing your machine’s current settings.
1. Press the SELECT FUNCTION key.
2. Press the REPORT PRINT One Touch key. The display
show:
1 : A C T I V I T Y R E P O R T 1 : A C T I V I T Y R E P O R T 1 : A C T I V I T Y R E P O R T 1 : A C T I V I T Y R E P O R T 1 : A C T I V I T Y R E P O R T
Y E S ( Y E S (
Y E S ( Y E S (
Y E S (
ß ß ß ß ß
) N O ( ) N O (
) N O ( ) N O (
) N O (
à à à à à
/ 1 - 6 ) / 1 - 6 )
/ 1 - 6 ) / 1 - 6 )
/ 1 - 6 )
3. Using the numeric keypad, press 5. The display shows:
5 : C O N F I G U R A T I O N 5 : C O N F I G U R A T I O N
5 : C O N F I G U R A T I O N 5 : C O N F I G U R A T I O N 5 : C O N F I G U R A T I O N
Y E S ( Y E S ( Y E S ( Y E S ( Y E S (
ß ß
ß ß
ß
) N O ( ) N O ( ) N O ( ) N O ( ) N O (
à à
à à
à
/ 1 - 6 ) / 1 - 6 ) / 1 - 6 ) / 1 - 6 ) / 1 - 6 )
4. Press the
ô
YES key and the report will begin printing.
5. Press the
SELECT FUNCTION
key to finish.
User Function Settings
User function settings allow you to customize the general
operation of your machine. Refer to the list below to determine
which settings you may need to change, then refer to Changing
User Function Settings to make the change.
Note: Depending on local telephone regulations, some
of the following user function settings may not be
available.
User Function Settings List
01:MCF. (SINGLE-LOC.) 01:MCF. (SINGLE-LOC.) 01:MCF. (SINGLE-LOC.) 01:MCF. (SINGLE-LOC.) 01:MCF. (SINGLE-LOC.)
- This function automatically
prints a Message Confirmation Report after each single location
transmission or polling transmission. Available settings are on
and off.
02:MCF. (MULTI-LOC.) 02:MCF. (MULTI-LOC.) 02:MCF. (MULTI-LOC.) 02:MCF. (MULTI-LOC.) 02:MCF. (MULTI-LOC.)
- This function automatically
prints a Broadcast Confirmation Report after each multiple
location transmission. Available settings are on and off.
03:ERR. REPORT (MCF.) 03:ERR. REPORT (MCF.) 03:ERR. REPORT (MCF.) 03:ERR. REPORT (MCF.) 03:ERR. REPORT (MCF.)
- This function automatically
prints a Message Confirmation Report each time an error occurs
during a transmission or polling transmission operation.
Available settings are on and off.
04:IMAGE IN MCF. 04:IMAGE IN MCF.
04:IMAGE IN MCF. 04:IMAGE IN MCF. 04:IMAGE IN MCF. - When a Message Confirmation
Report is automatically printed, this function adds a portion of
the first page your machine transmitted. This is printed at the
bottom of the message confirmation report. Available settings
are on and off.