Oki MC160MFP, Руководство по обслуживанию

Страница: 177 / 207

44292401TH Rev.1
176 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
31
“0”= Invalid
“1”= T.6 coding capability “0”= Invalid
“1”= T.6 coding enabled
32 Extend field
“0”= Without
“1”= With
33
“0”= Invalid
“1”= Field not valid capability
34
“0”= Invalid
“1”= Multiple selective polling capability
Set to “0”
35
“0”= Invalid
“1”= Polling sub address transmission (DTC) by Polled Sub
Address (DIS)/PSA
Set to “0”
36
“0”= Invalid
“1”= T.43 coding
37
“0”= Invalid
“1”= Plane interleave
38 Set to “0”
39 Set to “0”
40 Extend field
“0”= Without
“1”= With
41
“0”= Invalid
“1”= R8 x 15.4 lines/mm
42
“0”= Invalid
“1”= 300 x 300 pels/25.4 mm
43
“0”= Invalid
“1”= R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm
44
“0”= Invalid
“1”= Inch based resolution preferred
Resolution type selection
“0”= metric based resolution
“1”= inch based resolution
45
“0”= Invalid
“1”= Metric based resolution preferred
Do not care
46
Minimum scan line
time capability for
higher resolutions.
“0”: T 15.4 = T 7.7
“1”: T 15.4 = 1/2 T 7.7 Do not care
47
“0”= Invalid
“1”= Selective polling (DIS)/ Selective polling transmission
(DTC)
Set to “0”
48 Extend field
0: Without
1: With
49
“0”= Invalid
“1”= Sub Addressing capability “0”= Invalid
“1”= Sub Addressing transmission
50
“0”= Invalid
“1”= Password/ Sender Identification capability (DIS)/
Password transmission (DTC) “0”= Invalid
“1”= Sender Identification transmis-
sion
51
“0”= Invalid
“1”= Ready to transmit a data file (polling)
Set to “0”
52 Set to “0”
53
“0”= Invalid
“1”= Binary File Transfer (BFT)
Bit
No.
Designation DIS/DTC DCS
54
“0”= Invalid
“1”= Document Transfer Mode (DTM)
55
“0”= Invalid
“1”= EDIFACT Transfer (EDI)
56 Extend field
0: Without
1: With
57
“0”= Invalid
“1”= Basic Transfer Mode (BTM)
58 Set to “0”
59
“0”= Invalid
“1”= Ready to transmit a character or mixed mode docu-
ment (polling)
Set to “0”
60
“0”= Invalid
“1”= Character mode
61 Set to “0”
62
“0”= Invalid
“1”= Mixed mode
63 Set to “0”
64 Extend field
“0”= Without
“1”= With
65
“0”= Invalid
“1”= Processable mode 26
66
“0”= Invalid
“1”= Digital network capability
67
Duplex and half
duplex capabilities “0”= Half duplex operation only
“1”= Duplex and half duplex operation “0”= Half duplex operation only
“1”= Duplex operation
68
“0”= Invalid
“1”= JPEG coding
69
“0”= Invalid
“1”= Full color mode
70 Set to “0”
“0”= Invalid
“1”= Preferred Huffmann tables
71
“0”= Invalid
“1”= 12 bit/pixel/element
72 Extend field
“0”= Without
“1”= With
73
“0”= Invalid
“1”= No sampling (1:1:1)
74
“0”= Invalid
“1”= Nonstandard radiation light
75
“0”= Invalid
“1”= Nonstandard is mute range
76
“0”= Invalid
“1”= North American Letter (215.9 mm × 279.4 mm) capac-
ity “0”= Invalid
“1”= North American Letter (215.9
mm × 279.4 mm)
Bit
No.
Designation DIS/DTC DCS