Oki MC160MFP, Руководство по обслуживанию

Страница: 139 / 207

44292401TH Rev.1
138 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
Soft Switch No. Bit No. Designation Page No.
#30
8/7 Pause delay time within digits
P.161
6/5/4/3/
2/1
Signal tone insensitivity (dBm) after dial for busy tone
#31
7/6/5 Min re-dial interval
P.162
4/3/2/1 Max. re-dial attempts
#32
—
Reserved P.162
#33
7 V.17 Echo protection tone
P.162
6 V.29 Echo protection tone
5 Compromise equalize enable (CEQ) in the transmit path (TCEQ)
4 Compromise equalize enable (CEQ) in the receiver path (RCEQ)
#34
—
Reserved P.162
#35
8/7 Dial tone table switch time
P.163 6/5/4 Dial tone frequency upper range index
3/2/1 Dial tone frequency low range index
#36
8
Re-dial attempts continue fail counter (Using for detect line prob-
lem error)
P.163
4/3/2/1
Re-dial attempts fail limitation counter (Using for detect line prob-
lem error)
#37
7 Auto dial learning for V.34 modem
P.164 6/5/4 RX start symbol rate for V.34 modem
3/2/1 TX start symbol rate for V.34 modem
#38
7 Set/Reset V.34 transmit level deviation
P.164
6/5 V.34 flag number between ECM frame
4 Phase 2 guard tone power level (V.34)
1 V.8 /V.34 capability
#39
8 Disable V.34 TX for V.34 modem
P.164
7 Disable V.34 RX for V.34 modem
6/5 Flags number in FSK frame for V.34 modem
4 Manual TX mode for V.34 modem
3 Switch from V.17 to V.34 if DIS Bit 6 set after received DIS
2/1
Delay time in primary channel for V.34 transmit after CFR or
MCF signal
#40
8/7/6/5 V.17 RX start speed select receiving start speed for V.17
P.165
3/2/1 V.34 RX start speed prohibit V.34 mode when upper speed less
#41
8/7/6/5 V.17 TX start speed select receiving start speed for V.17
P.165
3/2/1 V.34 TX start speed prohibit V.34 mode when upper speed less
#42
8/7/6/5/
4/3/2/1
Reserved
P.166
#43
8/7/6/5/
4/3/2/1
Reserved
P.166
#44
—
Reserved P.166
Soft Switch No. Bit No. Designation Page No.
#45
5 Call transfer
P.166
4/3/2/1 No. of call transfer
#46
8 Daylight savings timer
P. 166
4 RX print mode
3 Default TX mode
2 Header for FAX TX
1 Print model name on top of TX page if name not register
#47
6 RX mode
P.167
5 Footer
#48
8 Activity report
P. 167 7/6 TX result report
5/4 RX result report
#49
5 Re-dial method if Comm. Fail
P.167
4/3/2/1 No. of rings
#50 8 Transmit or cancel after time out in “Memory TX” P.167
#51
4/3 T30 monitor report selection
P. 168
2 Send unsent page mode for memory transmission
#52
—
Reserved P. 168
#53
—
Reserved P. 168
#54
8 Report Date/Time type
P. 168
7/6 Report Date/Time format
5/4 Memory near full capacity for Fax and I-Fax scanning
3/2 Memory near full capacity for N-Scan scanning
#55
—
Reserved P. 169
#56
—
Reserved P. 169
#57
—
Reserved P.169
#58 8 Time out from PSK to FSK delay time P. 169
#59
6/5/4/
3/2/1
Time Between GMT (Greenwich Mean Time) P.170
#60
6 Quick memory TX
P.171 2 Off hook alarm after communication
1 Display destination selection within TX phase C
#61 4/3/2/1 Max. No. of ring P.171
#62
—
Reserved P. 172
#63
8 “#” key definition in PBX mode
P. 172 2 Fax TX image adjust
1 TX result report with image
#64
6 Print RX error report in RX side if no any FAX signal detected
P.172
5 10 PPS & 20 PPS selectable by user