Oki MC160MFP, Руководство по обслуживанию

Страница: 124 / 207

44292401TH Rev.1
123 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
14.3.6 CNG LEVEL
14.3.7 CED LEVEL
14.3.8 ECM MODE
14.3.9 CODING SCHEME
Function
• Calling tone output level.
Use
Setting/
procedure
• The default setting is -11 dBm.
-17 to -12 dBm ~ “-11 dBm” ~ -10 to -2 dBm
Function
• Answer tone output level.
Use
Setting/
procedure
• The default setting is -11 dBm.
-17 to -12 dBm ~ “-11 dBm” ~ -10 to -2 dBm
Function
• Select error correction mode.
Use
Setting/
procedure
• The default setting is ON.
“ON”: When an error occurs during communication, re-send the frame where the
error occurs.
OFF: Any error is ignored during communication.
Function
• Select compression method in TX/ RX mode.
Use
Setting/
procedure
• The default setting is JBIG.
MMR: A compression method.
MR:
A compression method.
MH: The simplest compression method.
“JBIG”: The most complex compression method that generates the smallest code
than any of following ones.
14.3.10 TONER EMPTY REPORT
A. Toner empty report (example)
14.3.11 PROTOCOL REPORT
14.3.12 GDI TIMEOUT
Function
• Select to generate a report to a specific destination when toner empty status occurs in
the engine.
Use
Setting/
procedure
• The default setting is OFF.
ON: Generate a report to report destination.
“OFF”: Not to generate report.
• If “ON” is selected, select generate report and send to remote side when toner runs out.
• Enter the telephone number for which the report is to be produced.
• Fax number specifications: An up-to-20-digit number that may consist of [0-9], [*], [#],
[pause], and [space]. (0-9, #, *, pause, _)
• The report will generate after 20 minutes, 24 hours, 4
8
hours, or 72 hours after the event
has occurred or until the condition is gone.
N
AME:ABC 123
TEL:1234567
DATE: J
u
n 10.2008 15:12
The Fax’s follo
w
ing conditions
w
ere appears, the machine may
b
e can not
w
ork correctly, the Fax
already send a report to yo
u
r dealer a
u
tomatically. They
w
ill contact
w
ith yo
u
soon.
Toner Cartridge Cyan : Empty
Toner Cartridge Magenta : F
u
ll
Toner Cartridge Yello
w
: F
u
ll
Toner Cartridge Black : F
u
ll
SERVICE REPORT
A0FDF3C500DA
Function
• Print communication report.
• Choose one from among the following.
Use
Setting/
procedure
• The default setting is OFF.
“OFF”: Disable T.30 communication report.
ON: Print T.30 communication report.
ON (ERROR): Print T.30 communication report when an error occurs.
Function
• To specify the time for GDI time out.
Use
Setting/
procedure
• The default setting is 60 sec.
5 sec / 10 sec / 20 sec / 30 sec / 40 sec / 50 sec / “60 sec”
13.3.12 GDI TIMEOUT
13.3.11 PROTOCOL REPORT
13.3.10 TONER EMPTY REPORT
13.3.7 CED LEVEL
13.3.8 ECM MODE
13.3.9 CODING SCHEME
13.3.6 CNG LEVEL