- 7 -
B2520 / B2540
Security
Security directives
Before turning on your device, check that the outlet that you are going to plug it into conforms to the
indications shown on the information plate (voltage, current, power network frequency) located on your
device. This device shall be connected to a single phase power network. The device shall not be installed
on bare ground.
Batteries and rechargeable batteries, packaging and electric and electronic equipment (EEE), shall be
thrown away, as specified by the Instructions of the ENVIRONMENT chapter of this manual.
Because of the device model, the power connector is the only way to disconnect the device from the
power network, that is why it is imperative to apply the following safety measures: your device shall be
connected to a power outlet located nearby. The outlet shall be easily accessible.
Your device is delivered with a grounded power cord. It is imperative to connect a grounded connector
to a grounded outlet connected to the building earthing.
For installation conditions and safe use precautions, refer to chapter “Installation”, page 9.
Repairs-maintenance
: Repairs and maintenance should only be carried
out by a qualified technician. No user serviceable parts inside the machine.
To reduce the risk of electrical shock, you shall not proceed with these
operations yourself, because by opening or removing the lids, you could
expose yourself to two hazards:
- The laser beam can cause irreversible eye damage.
- Avoid contact with powered parts because it can lead to electrical
shock with unfortunate consequences.
Содержание B2520
Страница 1: ......