Oki B2520, Руководство пользователя

Страница: 40 / 73

B2520 / B2540
- 40 -
Connect your WLAN adaptor
Your machine belongs to a new generation of
terminals that you can incorporate into a WLAN
network using a WLAN USB key.
1
Plug your WLAN USB key into the USB port
of your machine.
Configure your network
Creating or rejoining a network
Before attempting to use a WLAN adaptor on your
machine, you must enter the parameters that will
allow a WLAN network to recognise your machine.
On your machine you will find simple
instructions that guide you step by step
through the set-up of your network.
281 - SETUP / WLAN / ASS. CONFIG.
1
Type in , select the menu SETUP using the
keys or and confirm with
OK
.
2
Select WLAN using the keys or and
confirm with
OK
.
3
Select ASS. CONFIG. using the keys or
and confirm with
OK
.
4
Select NEW NETWORK using the keys or
and confirm with
OK
.
5
SSID appears on the screen, enter the name
of your network using the numerical keypad,
pressing the keys one after the other until
you obtain the name you want (32
characters maximum) and confirm with
OK
.
6
AD-HOC MODE or INFRA. MODE appear
on the screen. Go back to the beginning of
the chapter and make your choice.
Select one of these modes and confirm with
OK
.
- If you choose AD-HOC mode, the sub-
menu CHANNEL appears, enter a figure
between 1 and 13 and confirm with
OK
.
7
WITHOUT SECURITY or WITH SECURITY
appear on the screen.
Select the option you want and confirm with
OK
.
- If you choose WITH SECURITY the sub-
menu WEP KEY 1 appears, enter the key
number (1 to 4 maximum) that you are
using on your network.
8
IP CONF.: MANU or IP CONF.: AUTO
appear on the screen.
If you choose to set up the system manually,
go to the next paragraph and enter the
parameters IP ADDRESS, SUBNET MASK
and GATEWAY.
9
At the end of this procedure, you return to
the main menu of ASS. CONFIG.
10
Exit this menu by pressing the key
.
Referring to or changing your
network parameters
Each of the parameters of your network may be
changed as your network develops.
2822 - SETUP / WLAN / PARAMETERS / IP
ADDRESS
Your machine’s network radio adaptor
transmits data using the radio protocol
IEEE 802.11g; it can also be
incorporated into an existing IEEE
802.11b network.
When connecting to your machine, only
use the approved adaptor. Other
transmitting or receiving adaptors may
damage your device.
Regardless of whether you use your
machine in an infrastructure or ad-hoc
network, you must set up certain
network and security parameters (for
example, the Service-Set-ID (SSID)
and the WEP key). These must match
the network’s specifications.
We recommend that the settings of
your WLAN network should only be
changed by a person with a good
knowledge of the configuration of your
computer.
If you choose an exisiting network,
steps 5 and 6 ( and possibly 7) are
carried out automatically.
The WEP key number may be
configured in the menu:
29 - SETUP / TECHNICALS / WEP
KEYS NBR