OilSafe Advanced Bulk System, Руководство пользователя

Страница: 28 / 44

Lubrication Work Center
28
FIGURE 21: Dispensing Reel Faucet
Maintenance
PERIODIC MAINTENANCE SHOULD BE SCHEDULED AND PERFORMED ON YOUR SYSTEM
EVERY THREE MONTHS AFTERYOUR INITIAL INSTALLATION.
Requirements Prior to Maintenance:
WARNING!
ALWAYS ensure the main power supply is first locked out and the system depressurized before any
service is performed on this system. NEVER connect or disconnect lines, change filter elements, or
undertake any service work when this system is running or energized. SEVERE injury or death may
occur.
The Tank Isolation Valves (located on the underside of each tank) must be in the open position when
operat-ing the system and in the closed position when servicing the system.
CAUTION!
Personal Protective Equipment (“PPE”) should be worn when installing and operating this system.
Before performing any maintenance on the system, the Fire Safety Valves (located on bottom of each tank) should be
placed into closed positions.
Fire Safety Valves should be closed in the following situations:
4
Maintenance is to be performed on the system.
4
The system needs to be moved.
4
In the event of a fire, disaster, or emergency.