OilSafe Advanced Bulk System, Руководство пользователя

Страница: 19 / 44

Advanced Bulk System
19
Power Installation
WARNING!
F
ailure to follow system installation, safety and operating instructions may result in
severe injury or death, damage to plant and equipment and void manufacturer
warranties.
The following instructions should be carried out by trained and authorized electrician or
electrical personnel in accordance with your local and federal regulations and safety
procedures.
Always
ensure the system is appropriately grounded to earth utilizing the
grounding lugs provided at the rear base of the system, together with relevant grounding
equipment as specified and installed by your authorized electricalpersonnel.
ELECTRICAL INSTALLATION (For Pneumatic systems, proceed to page 20)
STEP 1. THE SYSTEM SHOULD BE GROUNDED BEFORE USE.
Grounding Lugs are provided at the rear base of the
system on the inner face of theframe uprights. At the rear of the system, locate the female power supply cord(s) coming
from the electrical – enclosure
See Figure 12.
STEP 2.
Plug the power cords into the individual wall outlets as designated in the specification sheet.
NOTE:
There will be one (1) power supply cord for each motor and each will be labeled to
correspond to its relatedmotor/tank. ALL POWER CORDS MUST BE PLUGGED IN FOR
THE SYSTEM TO WORK PROPERLY
FIGURE 12: Electrical Enclosure (Rear View of System)