OilSafe Advanced Bulk System, Руководство пользователя

Страница: 25 / 44

Advanced Bulk System
25
NOTE:
OilSafe recommends an initial Re-Circulation (“Kidney-Loop”) of the fluid at the first fill, to pre-
filter oils before they are consumed or used. Refer to Re-Circulation (“Kidney-Loop”) Cycle Time Guide in
the
Data Tables section (page 39)
for approximate run timesto complete single pass filtration of each
tank.
Re-Circulation (“Kidney-Loop”) Mode
STEP 12.
Put the operating valves in the “Re-Circulate” configuration – (left “DOWN”, right “UP”).
STEP 13.
Press start button to run each filled Bulk Tank for the approximate times set out in the Re-Circulation (“Kidney-
Loop”) Cycle Time Guide table in the
Data Tablessection (page 39).
Dispensing Mode
STEP 1.
Place valve handles into Dispense Mode, then press START to start the pump.
STEP 2.
Place a clean fluid transfer or storage container under the dispensing tap.
STEP 3.
Lift up on the handle
See Figure 19 (standard faucet style
illustrated)
.
STEP 4.
Release the handle and the flow will stop.
STEP 5.
Press STOP to stop the pump.
STEP 6.
Return valve handles to Recirculation Mode.
FIGURE 19: Operating the Standard Dispensing Faucet