Ohmeda Ohio Care Plus, Руководство по эксплуатации и обслуживанию

Страница: 61 / 84

6-7
6/Maintaining the Incubator
6-7
6600-0239-000 100
Controller assembly
CAUTION If you fill the cleaning tank past the fill mark, cleaning solution can leak into the
controller electronics.
Controller parts that do not contact the infant
Wipe the front panel, the top cover, the side panels, and the rear panel with a damp
cloth and a mild detergent solution. Do not apply cleaning solutions onto
or near the probe connectors.
Heater and fan assembly
Remove any lint build up from the rear of the controller. Wipe the fan, the motor shaft
and the controller surfaces to which these items are mounted, with a cloth dampened
in the cleaning solution. Use a minimum amount of solution. Do not spray on the
cleaning solution or permit it to contact any electrical parts.
Alternatively, lower the back of the controller into the cleaning tank accessory. Refer to
Figure 6-5.
CAUTIONS Never substitute any other container for the controller cleaning tank (Stock No.
6600-0202-500).
Do not clean the fan sensor with hydrogen peroxide.
Figure 6-5
Cleaning the controller
CAUTIONS Do not autoclave or gas sterilize any of the plastic parts.
Do not use strong acids or strong bases on plastic parts.
Controller
Bulkhead
Cleaning Tank
CI.02.018