Ofs Obeya, Руководство по сборке

Страница: 34 / 44

34 ofs.com imagine a place® 800.521.5381 Assembly instructions
Obeya assembly instructions
1. Insert ceiling module into structure from inside
lifting one end up at an angle over the upper
extrusion far enough to lift the other end of the
ceiling module above its mating extrusion or lift
entire ceiling module over the top of the structure
and assemble from above.
2. Set ceiling module into place by aligning the
rectangle nuts in the mounting brackets with
the inside slot in the supporting extrusions
and lowering the ceiling module down so the
mounting brackets set flush on the top face of
the structure's upper supporting extrusion at
each end.
3. Locate ceiling modules as desired in the ceiling
opening and secure by tightening the #8 x 3/4"
machine screw in each mounting bracket.
Note
: When filling the entire space with ceiling
modules and using OFS strip lighting between
ceiling modules leave a minimum 2 1/8" gap
between modules.
Rectangle nut
#8-32 x 3/4"
Machine screw
Ceiling module attachment