Ofs Obeya, Руководство по сборке

Страница: 26 / 44

26 ofs.com imagine a place® 800.521.5381 Assembly instructions
Obeya assembly instructions
1. Place the framed panel assembly that will attach to the post into position ensuring the correct
orientation so that the framed panel assembly is centered in the width of the post and the
mounting holes in the frame align with insert nuts in the edge of the post.
Note: make sure the light
sill engages into the groove in the side of the vertical frame member on the framed panel. The side
of the framed panel with the mounting holes will face the inside of the space. On walls using T and
4 way posts where both sides are inside the space the posts are machined to accept the panels in
either orientation and can be mounted as desired.
2. Secure the framed panel assembly to the wall structure with (2) 5/16-18 x 3/4" hex head bolts and
(2) 5/16 flat washers through the access slots in the side of the beam extrusion and threading them
into the insert nuts in the mounting rail of the framed panel. Leave the bolts loose for
panel adjustments.
3. Secure the framed panel assembly to the post using the 1/4-20 x 2.75" connector bolts. Insert one
bolt into each of the holes in the framed panel vertical rail and thread into the insert nuts into the
post edge and tighten the bolts so the framed panel vertical rail is tight against the post.
Note: Panel to panel connection.
Wood infill to wood infill: 2.75"
connector bolt & connector nut
Wood infill to metal infill: 3"
all-thread & 2 connector nuts
Metal infill to metal infill: 3.5"
all thread & 2 connector nuts.
Framed wall panel attachment
Multi panel partial wall
Connector nut
Connector bolt
Panel to post
connection
Beam access slot
5/16-18 x 3/4" bolt &
5/16 flat washer
Connector
bolt
Panel to panel
connection