Ofs Obeya, Руководство по сборке

Страница: 25 / 44

25 ofs.com imagine a place® 800.521.5381 Assembly instructions
Obeya assembly instructions
1. Place the framed panel assembly into position between
the posts ensuring the correct orientation so that the
framed panel assembly is centered in the width of the
post and the mounting holes in the frame align with
the insert nuts in the edge of the post.
Note: Make sure
the light sill engages into the groove in the side of the
vertical frame member on the framed panel. The side
of the framed panel with the mounting holes will face
the inside of the space. On the walls using T and
4 way posts where both sides are inside the space
the posts are machined to accept the panels in either
orientation and can be mounted as desired.
2 Secure the framed panel assembly to the wall structure
with (2) 5/16-18 x 3/4" hex head bolts and (2) 5/16" flat
washers through the access slots in the side of the
beam extrusion and threading them into the insert nuts
in the mounting rail of the framed panel. Leave the
bolts loose for panel adjustments.
3. Secure the framed panel assembly to each post using
the 1/4-20 x 2.75" connector bolts. Insert one bolt into
each of the holes in the framed panel vertical frame
member and thread into the insert nuts into the post
edge.
Note: Do not over tighten these bolts. Snug to
the inside face of the frame so that the framed panel is
centered in the opening. Over tightening the bolts can
cause the frame to warp. There should be a consistent
tolerance gap on each side of the frame that the light
sill extrusion will conceal.
4. Extend the adjustable glides out so that they are snug
to the floor. Use the glide extension cups for each
increment over 1/2" of adjustment needed.
5. After the panel is in position and the side bolts
have been snugged go back and tighten the
(2) 5/16-18 x 3/4" bolts in the top of the panel.
Beam access slot
5/16-18 x 3/4" bolt &
5/16 flat washer"
Frame mounting hole
1/4-20 x 2.75" Connector bolt
Framed wall panel attachment
Single panel full wall
Panel to post
connection