Ofs Obeya, Руководство по сборке

Страница: 38 / 44

38 ofs.com imagine a place® 800.521.5381 Assembly instructions
Obeya assembly instructions
Back of wall panel
Worksurface
bracket
#8 x 3/4 "
Wood screws
1. Before hanging the full wall panel insert the worksurface mounting brackets
through the back of the panel.
2. Aligning the holes in the bracket with the pre bores in the back of the panel
attach using (4) #8 x 3/4" wood screws per bracket.
3. Once the mounting brackets are secured to the wall panel it can be hung onto
the structure (see full wall panel instructions sheet)
4. Place the worksurface on the mounting brackets and secure the worksurface
using (3) #12 x 1" wood screws in each worksurface bracket from the bottom
side of the worksurface.
Note:
Wedge tops require 2 mounting brackets
along the back edge & 1 bracket along the
wide end of the worksurface. Narrow end
to face structure opening.
Sweep tops require 2 mounting brackets
along both the back edge (short
side) & return edge (long side) of the
worksurface. Return edge should be
opposite the structure opening.
Rectangle tops require 2 mounting
brackets along the back edge & 1
bracket at each end of the worksurface.
Rectangle tops cannot have an end
adjacent to the structure opening.
Obeya wall panel worksurface assembly