36
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Obeya assembly instructions
1. Before hanging the full wall panel inert the worksurface mounting brackets through
the back of the panel.
2. Aligning the holes in the bracket with the pre-bores in the back of the panel attach
using (4) #8 x 3/4" wood screws per bracket.
3. Attach the mounting pucks to the full wall panel by inserting a 1/4-20" x 1.5" SHCS
through the countersunk hole in the mount puck and threading into the 1/4-20 insert
nut installed in the full wall panel until tight.
4. Once the worksurface brackets and mount pucks are attached to the full wall panel
and the full wall panel is hung on the structure the table & leg assembly can now be
flipped over and rested on the worksurface brackets.
Note
: Leave enough space to
allow the long foot rails to be raised up between the mount pucks on the wall panel
and the knuckle on the legs.
Mount puck
1/4-20 x 1.5 SHCS
Foot rail
1/4-20 x 5/8 FH screw
Leg
knuckle
#8 x 3/4 "
Wood screws
Worksurface bracket
Back of wall panel
Obeya runoff worksurface assembly - continued
Note:
the two
mounting holes in
the puck should be
oriented in the 6
o'clock position
Содержание Obeya
Страница 1: ...Obeya assembly instructions ...
