OEG 650 001 128 Скачать руководство пользователя страница 93

Страница: 93 / 204

Pompe à chaleur pour piscine à onduleur

Matériel d'installation nécessaire pour votre pompe à chaleur :

• Câble d'alimentation adapté à la puissance requise de la pompe à chaleur.
• Un kit de dérivation et un ensemble de tuyaux en PVC adaptés à votre installation,

tels qu'une pince à dénuder, un solvant, une colle PVC et du papier de verre.

• Un jeu de chevilles et de vis d'expansion appropriées pour la fi xation de la pompe à

chaleur à la sous-construction.

• Nous recommandons de raccorder l'appareil à l'installation à l'aide de tuyaux fl exibles

en PVC afi n de réduire la transmission des vibrations.

ATTENTION: L'installation doit être eff ectuée par un spécialiste qualifi é.
Cette section n'est fournie qu'à titre d'information et doit être vérifi ée et, si
nécessaire, adaptée sur place, en tenant compte des conditions d'installation:

Installation

Conditions requises

3.1

Veuillez respecter les règles suivantes lors du choix de l'emplacement de votre pompe
à chaleur :
1. L'emplacement de la pompe à chaleur doit être facilement accessible pour faciliter

son utilisation et sa maintenance.

2. La pompe doit être installée au niveau du sol, de préférence sur un sol plat en béton.

Il faut s'assurer que l'emplacement est conçu pour le poids de l'appareil sans compro-
mettre la stabilité.

3. Un dispositif d'évacuation de l'eau doit être prévu à proximité de la pompe à chaleur

afi n de protéger l'emplacement de l'eau.

4. Si nécessaire, l'appareil peut être relevé à l'aide de blocs de montage appropriés qui

peuvent supporter le poids de la pompe elle-même.

5. Assurez-vous que l'appareil est correctement ventilé, que la sortie d'air n'est pas dirigée

vers le côté fenêtre des bâtiments adjacents et que l'air évacué ne peut pas refl uer.
En outre, une distance suffi sante doit être prévue autour de l'appareil pour les travaux
de réparation et de maintenance.

6. L'appareil ne doit en aucun cas être installé dans un endroit où des huiles, des gaz

infl ammables, des agents corrosifs ou des substances sulfureuses sont stockés ou
à proximité d'appareils haute fréquence.

7. Pour éviter la contamination de l'appareil par des éclaboussures de boue, l'appareil

ne doit pas être installé à proximité de routes ou de chemins.

8. Pour réduire au minimum le niveau de bruit, installez la pompe à chaleur de façon à

ce qu'elle ne soit pas dirigée vers des zones sensibles au bruit.

9. La pompe doit être placée hors de portée des enfants.

Ne placez pas d'objets à moins d'un mètre de la pompe à chaleur. Laissez une distance
de sécurité de 50 cm sur le côté et derrière la pompe à chaleur. Ne placez aucun objet
directement au-dessus ou devant l'appareil !

Lieu d'installation

3.2

3. Installation

WARNING: Installation must be carried out by a qualified engineer.
This section is provided for information purposes only and must be checked and adapted if
necessary according to the actual installation conditions.

3.1 Pre-requirements
Equipment necessary for the installation of your heat pump:

Power supply cable suitable for the unit’s power requirements.

A By-Pass kit and an assembly of PVC tubing suitable for your installation as well as stripper, PVC adhesive and
sandpaper.

A set of wall plugs and expansion screws suitable to attach the unit to your support.

We recommend that you connect the unit to your installation by means of flexible PVC pipes in order to
reduce the transmission of vibrations.

Suitable fastening studs may be used to raise the unit.

3.2 Location

Please comply with the following rules concerning the choice of heat pump location.
-

The unit’s future location must be easily accessible for convenient operation and maintenance.

It must be installed on the ground, fixed ideally on a level concrete floor. Ensure that the floor is sufficiently

stable and can support the weight of the unit.
-

A water drainage device must be provided close to the unit in order to protect the area where it is installed.

If necessary, the unit may be raised by using suitable mounting pads designed to support its weight.

Check that the unit is properly ventilated, that the air outlet is not facing the windows of neighbouring buildings

and that the exhaust air cannot return. In addition, provide sufficient space around the unit for servicing and
maintenance operations.
-

The unit must not be installed in an area exposed to oil, flammable gases, corrosive products, sulphurous

compounds or close to high frequency equipment.
-

To prevent mud splashes, do not install the unit near a road or track.

To avoid causing nuisance to neighbours, make sure the unit is installed so that it is positioned towards the

area that is least sensitive to noise.
-

Keep the unit as much as possible out of the reach of children.

Place nothing less than one metre in front of the heat pump.

Leave 50 cm of empty space around the sides and rear of the heat pump.

Do not leave any obstacle above or in front of the unit!

Indications en mm

Содержание 650 001 128













































































































































































































Результаты поиска

Содержание 650 001 128

Отзывы:

Похожие инструкции для 650 001 128

Бренды по названию

Популярные бренды

OEG 650 001 128, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 650 001 128

Отзывы:

Похожие инструкции для 650 001 128

Бренды по названию

Популярные бренды