OceanDMX WiFi Controller
Problem
Check
Cause
Fix
Cannot connect
to the WiFi unit
via phone/tablet
Check if you can
see the WiFi
network
WiFi Network
not visible
If you don’t see
the WiFi network
in your WiFi
list, press the
“Reset” button
on the controller
and after a few
seconds, you
should see the
WiFi network.
Check that you
are connected
to the unit’s
WiFi network
or that the unit
and your phone
is connected
to the same
network
Connect to the
correct Network
If you want to
connect to the
WiFi controller’s
network, you
should make
sure that your
phone or tablet
is connected to
that network
(OceanLED-DMX-
xxxx).
If you want to
use an external
WiFi network,
make sure you
follow the WiFi
setup procedure
detailed in Put
section here and
connect your
phone and WiFi
controller to that
network.
Phone is
connected
to the WiFi
controller, but
cannot control
light
Check that
the wires are
making good
contact with the
Control Output
connector
Poor electrical
connection
You need to
ensure that
the wires are
connected
properly to the
connector and
any breaks in the
cable rectified.
Check that the
DMX+ and DMX-
lines are not
swapped
Wires connected
wrong way
around.
Ensure that you
follow the correct
wiring procedure
and colour
combination.
When connecting
to a junction
box, connect the
DMX+ from the
controller to the
DMX+ on the
Junction box. Do
the same for the
DMX-.
Troubleshooting
2 0 1 9 I N S TA L L & O P E R AT I O N M A N U A L
CONTROLLER
KITS
32
