Preface
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
WARNINGS
Before installing your OceanDMX Controller, read and follow all warning notices
and instructions which are included. Failure to follow safety warnings and
instructions can result in property damage, severe injury or even death.
Before installing your OceanDMX Controller, check local laws for restrictions
regarding the use of coloured lights in your area.
Do not operate lights out of water for a period longer than 5 minutes followed
by an OFF period of at least 1 hour. Exceeding this may cause damage to the
light unit.
Salt is an inherently corrosive material. Natural and man-made surfaces are
susceptible to corrosion and deterioration when used in and around salt water.
Some combinations of plastic and polymer products are impervious to salt water
corrosion, however, screws and fasteners used for the installation must be of a
marine grade type stainless steel or equivalent and monitored annually to ensure
the controller remains in service for years to come.
Never Use Solvents! Cleaners, fuel, and other products that may contain strong
solvents, such as acetone, that attack many plastics greatly reducing their
strength and can cause irreversible damage.
DANGER
RISK OF ELECTRIC SHOCK OR ELECTROCUTION
This unit must be installed by a licensed or certified electrician in accordance
with all applicable local codes and ordinances. Improper installation will create
an electrical hazard which could result in death or serious injury to installers, or
others due to electrical shock, and may also cause damage to property. Always
disconnect the power to the light at the circuit breaker before servicing the
light. Failure to do so could result in death or serious injury to serviceman, or
others due to electrical shock.
!
2 0 1 9 I N S TA L L & O P E R AT I O N M A N U A L
CONTROLLER
KITS
2
