Oce Arizona 550 GT, Руководство пользователя

Страница: 76 / 263

■
Turn off lamps
■
Perform printhead maintenance when the ink temperature
is at least 40° Centigrade (104° Fahrenheit)
■
Swab print heads
■
Turn off ink heater
■
If the Automatic printer warm-up was set in Printer Set-
tings, turn it off
24 to 72 hours
■
Turn off lamps
■
Perform printhead maintenance when the ink temperature
is at least 40° Centigrade (104° Fahrenheit)
■
Swab printheads
■
Turn off ink heater
■
Wait until ink cools to below 30°C, then close off all
purge valves on the carriage
■
If the Automatic printer warm-up was set in Printer Set-
tings, turn it off
■
Remove or rewind any media from the RMO
3 to 14 days
■
Contact your local service representative if you need to
prepare the printer for longer term storage Longer than 14 days
How to Lock Out the Power Switch
Attention:
Some service procedures require locking out the On/Off switch to ensure operator safety.
When the switch is locked out, it is impossible to supply power to the printer.
1.
Refer to the Shutdown procedure "How to Power Off", at the beginning of this section.
2.
Turn the AC power switch to the Off position.
3.
Apply a lock and a tag-out label to the Lock-out area of the switch for the duration of
any service or maintenance procedures.
4.
Perform service procedure (generally this is done by a service technician)
5.
When maintenance or service is complete, remove the lock and tag-out label and turn
the AC power switch to the On position.
Chapter 5 - How to Operate the Océ Arizona 550 GT 76
How to Power the Printer On and Off