Oce Arizona 550 GT, Руководство пользователя

Страница: 128 / 263

Note:
The Media tension option allows you to choose the amount of force placed onto the
media shafts to keep it tightly drawn as it moves through the RMO unit. The low tension
setting is usually fine; however, if the media shows significant puckering across its entire
width, the medium or high tension setting may be required.
8.
Select the Media Advance Correction Factor
Note:
Leave it at 50 unless you see light or dark lines of banding in the printed image (refer to
the next section "How to Set the Media Advance Correction Factor for more details).
9.
When the displayed media values are correctly matched to the loaded media, click Close
to exit the Media Manager.
10.
Click on the Roll icon in the menu bar of the Job Control module to activate the RMO
print queue (the icon will change from yellow to green).
Result
Any print jobs that are in the queue, not on hold, and marked as roll jobs will print.
There is no explicit confirmation required to start a roll media print job. Any roll media
jobs in the print queue will start to print immediately.
Chapter 6 - How to Operate the Roll Media Option 128
How to Print on Roll Media