Oce 5250, Руководство пользователя

Страница: 111 / 198

Print data formats 111
Use the following command to initialize correctly an HP-GL/2 file:
■
ESC%-1BBPIN;
..... or,
■
BPIN;
.....
■
You can select HP-GL/2 format from the control panel under ‘data format’.
■
You can use a Remote Configuration File (RCF) command to select the
HP-GL/2 format, which is the recommended start-up on HP-GL/2.
■
The
PG;
command is mandatory to close properly the HP-GL/2 file.
Otherwise, the printer gives unpredictable results. The printer may also hang,
if the following file is also HP-GL/2.
Use the following commands to close correctly an HP-GL/2 file:
■
PUSP0PG;
or,
■
PUSP0PGRP;
(This will print one additional copy of the file.)
HP-RTL commands
HP-RTL is a subset of HP-GL/2. Hence, all HP-RTL print data files must start
with
ESC%-1BBPIN;
or
BPIN;
To use HP-RTL, set ‘data format’ to ‘auto’ or ‘hpgl/2’ on the printer control
panel. You can also select HP-GL/2 via a remote configuration file.
HP-RTL print data files must close with
ESC%0B; PG;
which reverts the printer
to the HP-GL/2 format. Otherwise, the printer gives unpredictable results. The
printer may also hang.
See ‘HP-RTL commands’ on page 190 for a list of supported HP-RTL
commands.