manualshive.com logo in svg

NXP Semiconductors i.MX6QSabreSD, Руководство пользователя, Страница: 80 / 199

Поделиться
Скачать
NXP Semiconductors i.MX6QSabreSD Скачать руководство пользователя страница 80

• Target datastore to retrieve. For description of possible values, refer to 

Netopeer2 CLI datastore

. Note, that the url

configuration datastore cannot be retrieved.

13. lock

Performs the NETCONF 

lock

 operation to lock the entire configuration datastore of a server. For details, see RFC 6241

section 7.5.

lock [--help] --target running|startup|candidate

Where the

• --target: specifies the target datastore to lock. For description of possible values, refer to 

Netopeer2 CLI datastore

.

Note, that the url configuration datastore cannot be locked.

14. unlock: Performs the NETCONF 

unlock

 operation to release a configuration lock, previously obtained with the 

lock

operation. For more details see RFC 6241 section 7.6.

unlock [--help] --target running|startup|candidate

where

• --target: specifies the target datastore to unlock. For description of possible values, refer to 

Netopeer2 CLI

datastore

. Note, that the url configuration datastore cannot be unlocked.

15. verb

• Enables/disables verbose messages.

16. quit

• Quits the program.

6.4.3.2 Netopeer2 CLI datastore

Following are the netopeer2 CLI datastores:

• running

— This is the base NETCONF configuration datastore holding the complete configuration currently active on the device.

This datastore always exists.

• startup

— The configuration datastore holding the configuration loaded by the device when it boots. This datastore is available

only on servers that implement the 

:startup

 capability.

• candidate

— The configuration datastore that can be manipulated without impacting the device's current configuration and that can

be committed to the running configuration datastore. This datastore is available only on servers that
implement 

:candidate

 capability.

• url:URI

— Refers to a remote configuration datastore located at URI. The file that the URI refers to contains the configuration data

hierarchy to be modified, encoded in XML under the element 

config

 in the

urn:ietf:params:xml:ns:netconf:base:1.0

 namespace. This datastore is available only on servers that

implement the 

:url

 capability.

6.4.4 Sysrepod

Sysrepo deamon provides the functionality of the datastore on the system (executes the system-wide Sysrepo Engine) and should
normally be automatically started by system startup. However, auto-start is not configured by cmake install operation and you
need to configure it yourself, accroding to the guidelines of your system.

NXP Semiconductors

NETCONF/YANG

Open Industrial User Guide, Rev. 1.8, 05/2020

User's Guide

80 / 199

Содержание i.MX6QSabreSD








































































































































































































Отзывы:

Нет отзывов