manualshive.com logo in svg

NXP Semiconductors i.MX6QSabreSD, Руководство пользователя, Страница: 179 / 199

Поделиться
Скачать
NXP Semiconductors i.MX6QSabreSD Скачать руководство пользователя страница 179

2. In Linux kernel environment, make sure the below options are enabled:

$make linux-menuconfig
[*] Networking support --->
    <M>   NFC subsystem support   --->
        Near Field Communication (NFC) devices  --->
            <M> NXP PN5XX based driver 

 

The NXP PN5XX based driver only supports the Module mode.

  NOTE  

3. Use the 

make

 command to create the images.

14.5 Testing the NFC click board

Use the following steps for testing the NFC Clickboard:

1. Install NFC driver module

[root@OpenIL:~]# modprobe pn5xx_i2c.ko

2. The following logs appear at the console after the above command is successful. The error information can be ignored in

this case.

3. Run the nfcDemoApp application

 [root@OpenIL:~]# nfcDemoApp poll

NXP Semiconductors

NFC click board

Open Industrial User Guide, Rev. 1.8, 05/2020

User's Guide

179 / 199

Содержание i.MX6QSabreSD








































































































































































































Отзывы:

Нет отзывов