Table 34. cbsset command (continued)
Parameter <argument>
Description
--tc <value>
Traffic class number.
--percentage <value>
Set percentage of tc limitation.
--all <tc-percent:tc-percent...> Not supported.
Table 35. cbsget
Parameter <argument>
Description
--device <ifname>
An interface such as
eno0/swp0
--tc <value>
Traffic class number.
Table 36. regtool
Parameter <argument>
Description
Usage: regtool { pf number }
{ offset } [ data ]
pf number: pf number for the pci resource to act on
offset: offset into pci memory region to act upon
data: data to be written
Table 37. ctset
Parameter <argument>
Description
--device <ifname>
An interface such as
swp0
--queue_stat <value>
Specifies which priority queues have to be processed in cut-through mode of operation. Bit 0
corresponds to priority 0, Bit 1 corresponds to priority 1 so-on.
Table 38. cbgen
Parameter <argument>
Description
--device <ifname>
An interface such as
swp0
--index <value>
Index entry number in this controller. Mandatory to have.
This value corresponds to
tsnStreamIdHandle
of
cbstreamidset
command.
--iport_mask <value>
INPUT_PORT_MASK: If the packet is from input port belonging to this port mask, then it's a
known stream and Sequence generation parameters can be applied
--split_mask <value>
SPLIT_MASK: Port mask used to add redundant paths (or ports). If split is enabled
(STREAM_SPLIT) for a stream. This is OR'ed with the final port mask determined by the
forwarding engine.
Table continues on the next page...
NXP Semiconductors
TSN
Open Industrial User Guide, Rev. 1.8, 05/2020
User's Guide
103 / 199