NXP Semiconductors i.MX6QSabreSD Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 199

NXP Semiconductors i.MX6QSabreSD Скачать руководство пользователя страница 78

5. copy-config: Performs NETCONF

copy-config

operation. For details, see RFC 6241 section 7.3.

copy-config [--help] --target running|startup|candidate|url:<url> (--source running|startup|
candidate|url:<url> | --src-config[=<file>])
[--defaults report-all|report-all-tagged|trim|explicit]

Where, the arguments are the following:

• --defaults mode: Use: with the

-defaults

capability with specified retrieval mode. For details, refer to the RFC 6243

section 3 or WITH-DEFAULTS section of this manual.

• --target datastore: Specifies the target datastore for the

copy-config

operation. For description of the datastore

parameter, refer to

Netopeer2 CLI datastore

.

• --source datastore: Specifies the source datastore for the

copy-config

operation. For description of the datastore

parameter, refer to

Netopeer2 CLI datastore

.

6. delete-config Performs NETCONF

delete-config

operation. For more details see RFC 6241 section 7.4.

delete-config [--help] --target startup|url:<url>

Where

• target datastore: Specifies the target datastore for the

delete-config

operation.

7. edit-config

Performs NETCONF

edit-config

operation. For details, see RFC 6241 section 7.2.

edit-config [--help] --target running|candidate (--config[=<file>] | --url <url>)
[--defop merge|replace|none] [--test set|test-only|test-then-set] [--error stop|continue|
rollback]

Where

• --defop operation

— Specifies default operation for applying configuration data.
— merge: Merges configuration data at the corresponding level. This is the default value.
— replace: Edits configuration data completely replaces the configuration in the target datastore.
— none: The target datastore is unaffected by the edit configuration data, unless and until the edit configuration

data contains the operation attribute to request a different operation. For more info, see the EDIT-CONFIG
section of this document.

ITo delete non-madatory items, nc:operation="delete" needs to be added into the end of start tag of the item to be
deleted. At the same time, the namespace xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" also needs to be
added ioto start tag of the root node. Mandatory items can't be deleted individually, they can only be deleted with
their parent node.

NOTE

• --error action

— Sets reaction to an error.
— Stop: Aborts the operation on first error. This is the default value.
— Continue: Continues to process configuration data on error. The error is recorded and negative response is

returned.

— Rollback: Stops the operation processing on error and restore the configuration to its complete state at the start

of this operation. This action is available only if the server supports rollback-on-error capability (see RFC 6241
section 8.5).

NXP Semiconductors

NETCONF/YANG

Open Industrial User Guide, Rev. 1.8, 05/2020

User's Guide

78 / 199

«
...
76
77
78
79
80
...
»

Содержание i.MX6QSabreSD








































































































































































































Отзывы:

Нет отзывов