manualshive.com logo in svg

NXP Semiconductors i.MX6QSabreSD, Руководство пользователя, Страница: 183 / 199

Поделиться
Скачать
NXP Semiconductors i.MX6QSabreSD Скачать руководство пользователя страница 183

  -*- GPIO Support  --->
    [*]   /sys/class/gpio/... (sysfs interface)
          Memory mapped GPIO drivers  --->
            [*] MPC512x/MPC8xxx/QorIQ GPIO support

 

The above operation can be replaced by executing the command: 

make nxp_ls1028ardbXXXX_defconfig

.

  NOTE  

3. Use the 

make

 command to create the images.

15.5 Testing the BEE click board

The test application 

bee_demo

 is created by using the BEE Click Board library. This application can transfer the file between two

BEE Click Boards.

1. You need to create a file in any path. For example, 

./samples/test.txt

.

2. First, start a server node by running the command below:

bee_demo -s -f=XXX

The command parameters are as below:

• -s: This device node acts as a server.
• -f=XXX: This parameter is valid only on the server node. XXX is the file path (relative or absolute) to be transferred.

root@OpenIL-Ubuntu-LS1028ARDB:~# ls
samples
root@OpenIL-Ubuntu-LS1028ARDB:~# bee_demo -s -f=./samples/test.txt
spi mode: 0x0
bits per word: 8
max speed: 500000 Hz (500 KHz)
BEE  Click  Board  Demo.
This node is a server node.
Waiting for a client
Reading the content of the file

3. Start a client node on another LS1028ARDB by running the command 

bee_demo -c

. In the above command, the parameter

-c implies that this device node acts as a client. After receiving the file, the client node automatically exits. The received
file is saved in the current path.

root@OpenIL-Ubuntu-LS1028ARDB:~# ls
                    samples
                    root@OpenIL-Ubuntu-LS1028ARDB:~# bee_demo -c
                    spi mode: 0x0
                    bits per word: 8
                    max speed: 500000 Hz (500 KHz)
                    BEE  Click  Board  Demo.
                    This node is a client node.
                    Starting to get a file
                    Send the SEQ_REQ command.
                    Send the SEQ_START command.
                    Send the SEQ_START command.
                    root@OpenIL-Ubuntu-LS1028ARDB:~# ls
                    samples  test.txt
                    root@OpenIL-Ubuntu-LS1028ARDB:~#

NXP Semiconductors

BEE Click Board

Open Industrial User Guide, Rev. 1.8, 05/2020

User's Guide

183 / 199

Содержание i.MX6QSabreSD








































































































































































































Отзывы:

Нет отзывов