manualshive.com logo in svg

NXP Semiconductors i.MX6QSabreSD, Руководство пользователя, Страница: 123 / 199

Поделиться
Скачать
NXP Semiconductors i.MX6QSabreSD Скачать руководство пользователя страница 123

All frames pass and get all yellow frames (use CIR as well as EIR).

10. Send one yellow stream (rate = 300M) on TestCenter.

ethtool -S swp0 

 

Note that not all frames could pass and get yellow and red frames.

  NOTE  

8.1.4.6 Qav test case

The below figure illustrates the Qav test case setup.

Figure 36. Qav test case

1. Set the percentage of two traffic classes:

tsntool> cbsset --device swp2 --tc 1 --percentage 20
tsntool> cbsset --device swp2 --tc 2 --percentage 40

2. Send two streams from Test center, then check the frames count.

ethtool -S swp2

Note that the frame count of queue1 is half of queue2.

 

Stream rate must lager than bandwidth limited of queue.

  NOTE  

3. Capture frames on swp2 on TestCenter.

NXP Semiconductors

TSN

Open Industrial User Guide, Rev. 1.8, 05/2020

User's Guide

123 / 199

Содержание i.MX6QSabreSD








































































































































































































Отзывы:

Нет отзывов