7
Con
ten
ts/Safe
ty In
struction
s
General Precautions for the FOMA Terminal and UIM
DANGER
Do not disassemble, remodel
or solder the terminal and UIM.
●
Fire, injury, electric shock or
malfunction may result.
Do not let FOMA terminal and
UIM get wet.
●
Contact with water or other
liquids may cause heating,
electric shock, fire, malfunction or
injury. Take care not to use the
terminal and UIM in areas where
they could get wet.
Do not use or leave the FOMA
terminal and UIM in places with
a high temperature such as
near a fire or places exposed to
direct sunlight or in cars under
the blazing sun.
●
Deformation, malfunction,
heating, bursting, catching fire or
the deterioration of performance
may result. Also, part of the case
could get heated, causing bare
skin burns.
WARNING
If odor, overheating,
discoloration, or deformation
is detected during use,
immediately remove the FOMA
terminal from the card slot.
●
Continued use of the FOMA
terminal may result in
overheating, bursting or catching
fire.
Turn off the PC into which the
FOMA terminal is inserted
before you enter the place
where there are flammable
gases such as gas station.
Do not throw the FOMA
terminal or UIM, or subject
them to severe shocks.
●
Heating, bursting, catching fire,
malfunction or fire may result.
Be careful not to let electro
conductive materials (metal
pieces, pencil leads etc.)
contact with the connector
terminal. Also, make sure that
these are not entered into the
inside of the FOMA terminal.
●
Fire or other malfunctions may
result from a short circuit.
Do not put the FOMA terminal
or UIM in microwave ovens or
other heating appliances or
high pressure containers.
●
The FOMA terminal or UIM may
overheat, smoke or catch fire, or
its circuit parts may burst.
Do not disassemble
Avoid water
Safety Precautions
