74
Oth
e
r E
x
clusive
App
licatio
ns
h
From the menu, select “
ファイル
(file)”
y
“
ハイパーターミナルの終了
(Exit Hyper
Terminal)” to exit Hyper Terminal
• If “
現在、接続されています。切断してもよろしいです
か？
(You are currently connected. Do you want to
disconnect?)” appears, click [
はい
(Yes)].
• The screen appears to confirm whether to save the
setting, however, you do not need to save it.
•
The access point name (APN) is information to be
registered in the FOMA terminal. If you connect another
FOMA terminal, you need to register the access point
name (APN) again.
•
To continue to use the access point name (APN) saved
in the PC, register the same number (cid) to the same
APN in the FOMA terminal.
•
If the entered AT command is not displayed, enter
“ATE1
”.
■
cid (Registration number)
The FOMA terminal has registration numbers
from cid1 to cid10, and the defaults are as
follows:
• To connect to a provider other than “mopera U” or
“mopera”, you need to set the access point name
(APN) to any of cid2 or cid4 to cid10.
■
“
電話番号
(Phone number)” for connecting to
the access point name (APN) registered in cid
“
＊
99
＊＊＊
<cid>#”
■
To reset the access point name (APN)
Entry form
AT+CGDCONT=
(Reset all cids)
AT+CGDCONT=<cid>
(Reset specified cid
only)
■
To display the current access point name
(APN)
Entry form
AT+CGDCONT?
Setting Show/Hide Caller ID
You can use the AT command, *DGPIR
command, to specify this setting before
initiating a dial-up connection.
•
Your Caller ID is valuable information. Be cautious about
sending your Caller ID.
•
When using “mopera U” or “mopera”, you need to notify
your caller ID.
•
When using overseas, set AT
＊
DGPIR=0 (default: Use
APN as it is).
<Example: For Windows XP>
a
Perform Steps 1 to 5 on “
接続先（APN）を
設定する
(Configuring Access Points
(APN))” (P73)
b
Set “Show/Hide Caller ID” for packet
communication
Entry form
a
1
…
Append “184” (Hide)
2
…
Append “186” (Show)
b
Press the “Enter” key of the PC
c
Check that [OK] appears
•
If the entered AT command is not displayed, enter
“ATE1
”.
■
Setting the Show/Hide Caller ID by dialup
network settings
You can also append “184 (Hide)” or “186
(Show)” to the access point number in the dial-up
network settings (P75).
* The table below lists the settings of “186” or “184” set
by both the *DGPIR command and dial-up network
settings.
■
To display the current status of send/hide
Caller ID
Entry Form
AT
＊
DGPIR?
Registration Number (cid)
Access Point Name (APN)
1
mopera.ne.jp (mopera)
2
Unassigned
3
mopera.net (mopera U)
4 to 10
Unassigned
Dial-up network settings
(when <cid>=3)
＊
DGPIR command settings
Not set
Hide
Show
＊
99
＊＊＊
3#
Show
Hide
Show
184
＊
99
＊＊＊
3#
Hide
186
＊
99
＊＊＊
3#
Show
AT
＊
DGPIR=<n>
a b
Sett
ing
s
wit
h
o
u
t F
O
MA PC Co
nfig
urat
ion
S
o
ft
ware
