11
Con
ten
ts/Safe
ty In
struction
s
Handling and Care
General Usage Guidelines
■
Keep the FOMA terminal away from water.
The FOMA terminal and UIM are not waterproof. Do not use the terminal in places with high
humidity such as a bath or where rain may get it wet. If you carry the card close to your body,
moisture from sweat may corrode the internal parts causing a malfunction. Note that
malfunctions deemed to be caused by water are not covered by the warranty, and may be
impossible to repair. Since these malfunctions are not under warranty, even when repair is
possible, it will be done at the user’s expense.
■
Clean the FOMA terminal with a dry, soft cloth (Lens cleaning cloth).
If the FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may
disappear or color may fade.
■
Do not place the equipment near air conditioner outlets.
Condensation may form due to rapid changes in temperature, and this may corrode internal parts
and cause malfunction.
■
Do not use excessive force using the FOMA terminal.
If FOMA terminal is inserted to a full bag, or placed in a pocket and sat on, its internal PCBs may
be damaged or malfunction.
And if the Earphone Microphone is inserted to the Headset Jack, the connector may be damaged
or malfunction.
FOMA Terminal
■
Avoid using in extremely high or low temperatures.
The FOMA terminal should be used within a temperature range from 5 °C to 35 °C and a
humidity range from 45 % to 85 %.
■
FOMA terminal may affect fixed phones, televisions or radios in use nearby. Use as far as
possible from such appliances.
■
Do not insert the Headphone/Microphone to the Headset Jack obliquely or do not pull out
with the connector is inserted.
Malfunction may result.
■
It is normal for the FOMA terminal to become warm during use. You can continue to use it
even when it is warm.
■
Do not touch the pins on the connector or use excessive force.
Malfunction may result.
■
Remove the FOMA M2501 HIGH-SPEED from the PC when transporting.
■
Put the FOMA terminal into the exclusive card case for the FOMA terminal when carrying.
■
Take care not to drop the FOMA terminal when removing the FOMA terminal from the
exclusive FOMA HIGH-SPEED terminal card case.
→
P14
■
When it is not in use, keep the FOMA M2501 in its case to keep the connector contacts
clean.
Dirty contacts can result in intermittent connections.
H
a
nd
lin
g a
n
d C
a
re
