NTT docomo FOMA M2501, Руководство пользователя

Страница: 114 / 135

111
Ap
pen
d
ix
AT+CR=<n>
[&F] [&W]
[?] [=?]
Set whether to display the
bearer (communication type)
before “CONNECT” is displayed
when 64K data communication,
GSM line switching, packet
communication or video call is
connected. n=0 (default)
: Hide.
n=1 : Display in the form of
“+CR : <serv>”.
serv=GPRS
: Packet
communication.
serv=SYNC
: 64K data
communication.
serv=AV64K : Video calls.
AT+CR=1
OK
ATD
＊ 99 ＊＊＊ 1#
+CR : GPRS
CONNECT
AT+CRC=<n>
[&F] [&W]
[?] [=?] Set whether to use extended
result code for incoming
connection. n=0 (default)
: Not to use +CRING.
n=1 : Use +CRING: <type>.
AT+CRC=0
OK
AT+CREG=<n>
[&F] [&W]
[?] [=?]
Set whether to show out of the
service area or in the service
area. n=0 (default)
: Hide.
n=1 : Show.
Enter “AT+CREG?” to
show in the form of
“+CERG : <n>,
<start>”
start=0 : Out of the service
area of 64K data.
communication/
video calls
start=1 : Inside of the
service area of
64K data.
communication/
video calls
start=4 : Unknown.
start=5 : Inside of the
service area of
64K data
communication/
video calls (while
roaming).
AT+CREG=1
OK
AT+CUSD=[<n>[,
<str>[,<dcs>]]]
[&F] [&W]
[?] [=?]
Change the settings of the
network, concerned with the
additional services and the like. n=0 (default)
: Answer OK without
answering interim
result.
n=1 : Answer interim result.
str : Service code
For details, refer to
“
ネットワークサービ
ス操作ガイド
(Network
Service Operation
Guide)”.
dcs=0 : Fixed value
AT+CUSD=0,“xxxxxx”
OK
AT+FCLASS=<n>
[&F] [&W]
[?] [=?] Perform mode setting. n=0 (default) : data AT+FCLASS=0
OK
AT+GCAP Display the capability list of the
FOMA terminal.
ー
AT+GCAP
+GCAP:
+CGSM, +FCLASS, +W
OK
AT Command Overview Parameters/Descriptions Command Examples
A
T
Co
mm
and
List
Continued on the next page