NTT docomo FOMA M2501, Руководство пользователя

Страница: 119 / 135

116
Ap
pen
d
ix
*: <cid> is the number used to control the destination
(APN) for the Packet communication to be
registered in FOMA terminal. 1 to 10 can be
registered in FOMA terminal. The default value of
<cid>=1 is “mopera.ne.jp” and <cid>=3 is
“mopera.net”. Set cid to 2 or a number between 4
and 10.
In <Maximum bitrate UL> and <Maximum bitrate
DL>, the minimum connection speed [in Kbps] is set
for both upload and download traffic between FOMA
terminal and the base station. If the parameter is set
to None (default), all speeds are permitted. If values
are set, any connection at a speed more than that is
not permitted, and the packet communication may
not be established.
• Operation when parameter is omitted
AT+CGEQREQ= :
Set all <cid> as default.
AT+CGEQREQ=<cid> :
Set specified <cid> as default.
• Command examples
Command used to require 384Kbps upload and
3,648Kbps download (when <cid> is 3)
AT+CGEQREQ=3,2,384,3648
OK
* This command, which is a setting command, is not
stored in the nonvolatile memory written by [&W], and is
not reset by [&F] and [Z], either.
List of Reasons of Disconnection
■ Packet communication
■ 64K data communication
Result Codes
• Result code format varies from the ATV<n> (P114) setting
of AT command.
• n=1 (default):Display the result code by character
n=0
:Display the result code by numeric
• The RS232 protocol requires displaying a communication
speed, however, because the FOMA terminal and PC are
connected with the PCMCIA interface, the displayed
connection speed may not be the same as the actual
connection speed.
■ List of Result Codes
■ Extended Result Codes
When &E0
Show the connection speed between the FOMA
terminal and the base.
When &E1
Value Reason
27 APN does not exist, or is not valid.
30 Disconnected by the network.
33 No subscription for packet communication.
36 Disconnected properly.
Value Reason
1 Specified number does not exist.
16 Disconnected properly.
17 Cannot communicate as the other party is busy.
18
Although sent, there was no response within the
specified time.
19
Cannot communicate as the other party is being
called.
21 The other party rejected the communication.
63 The network service and the option are not valid.
65 Unsupported processing speed was specified.
88
Called to or received a call from a terminal with
different terminal attributes.
Numeric
display
Text display Description
0 OK Operation performed properly.
1 CONNECT Connected to the other party.
2 RING Incoming call.
3 NO CARRIER Line disconnected.
4 ERROR Unable to accept command.
6 NO DIAL TONE Unable to detect dial tone.
7
BUSY Detect busy tone. (Applied only
when dialing by circuit switching.)
8 NO ANSWER Completed connection timeout.
101 DELAYED Within restricted redialing time.
Numeric
display
Text display Connection speed
121 CONNECT 32000 32000bps
122 CONNECT 64000 64000bps
125 CONNECT 384000 384000bps
133 CONNECT 3648000 3648000bps
Numeric
display
Text display Connection speed
5 CONNECT 1200 1200bps
10 CONNECT 2400 2400bps
11 CONNECT 4800 4800bps
13 CONNECT 7200 7200bps
12 CONNECT 9600 9600bps
15 CONNECT 14400 14400bps
16 CONNECT 19200 19200bps
17 CONNECT 38400 38400bps
18 CONNECT 57600 57600bps
19 CONNECT 115200 115200bps
20 CONNECT 230400 230400bps
21 CONNECT 460800 460800bps
A
T
Co
mm
and
List