41
Utili
ty Sof
tware
ネットワーク選択
(Select Network)
Select a network (carrier) that can be connected with the
communication method selected in “
通信方式選択
(Select
Communication Method)”. To select, specify “WCDMA
固定
(Static
WCDMA)” or “GSM
固定
(Static GSM)” in “
通信方式選択
(Select
Communication Method)”.
y
Pull down menu
y
Select an option from the following
y
Click [
選択
(Select)] (
b
)
■
If “
ネットワーク選択
(Select Network)” does
not appear other than “
オート
(Auto)”
Click [
ネットワーク再検索
(Search again for a
Network)] the Communication Setting screen.
• After the search, found networks will be displayed in
“
ネットワーク
1/
ネットワーク
2 (Network1/Network2)”.
•
When using the FOMA terminal in Japan, set “
通信方式選
択
(Select Communication Method)” to “
オート
(Auto)”.
•
When switching communication method takes a long
time, the signal level display on the Main screen may
become .
•
Calls or communications are available though searching
may take a long time or may not be performed, or a
network may not be set depending on the radio wave or
the network status.
•
The selected network (carrier) is displayed on the Main
screen.
Security Settings
Setting the UIM PIN
You can set the PIN1 code for the UIM.
•
While the Security Setting screen is displayed, no
operations can be performed from the Main screen. If a call
arrives during the operation, the call can be answered after
[
閉じる
(Close)] is clicked, however, the options being set
will be canceled.
Entering a PIN1 Code/Changing the
PIN1 Code
Only when the M2501 HIGH-SPEED Utility is
launched for the first time after the FOMA
terminal power is turned on (connect the FOMA
terminal and the PC, then turn on the PC),
configure the settings to require the PIN1 code
to use the terminal, or change the PIN1 code.
a
Click
(
各種設定
(Settings)) the
Main screen (P32)
y
“
セキュリティ設定
(Security Settings)”
b
Perform the following steps
PIN1
コード照合
(PIN1 Code Verification)
You can configure to require entry of the PIN1 code to use the
FOMA terminal.
y
Pull down menu
y
Select the following option
y
[
設定
(Set)]
y
Enter the PIN (4- to 8-digit)
y
Click [
照合
(Verify)]
• Enter the PIN1 code using the keyboard of the PC. The PIN1
code entered is masked with “
＊
”.
オート
(Auto)
: Connectable networks (carrier) will be searched
automatically.
ネットワーク１
*
/ネットワーク２
*
(Network 1
*
/Network 2
*
)
: Directly select the current connect network (carrier) or
connectable network (carrier).
*: The names of networks (carriers) appear. When using
the FOMA terminal in Japan, “JP DoCoMo” appears.
Default
PIN1コード照合
(PIN1 Code Verification):
無し
(No)
有り
(Yes)
: PIN1 code verification becomes necessary. Only when the
M2501 HIGH-SPEED Utility is launched for the first time
after the FOMA terminal power is turned on (connect the
FOMA terminal and the PC, then turn on the PC), the PIN1
code verification screen opens.
無し
(No)
: No PIN1 code is verified.
Security Setting Screen
Security Settings
Continued on the next page
