NOVUS AUTOMATION
44/48
11.4
DIAGNOSTICS
In the
RHT
Climate
Transmitter
configuration screen, there is the "Diagnostics" screen. By clicking on it, the software will monitor some device
states. The information update interval is 1 second.
In this section you can check whether the device is working properly by forcing temperature and relative humidity readings, alarm outputs and
buzzer.
11.4.1
INPUT DIAGNOSTICS
The input diagnostics shows information about the instantaneous value of the psychrometric properties, displayed with two decimal places. In
addition, it is also possible to force a value of temperature or relative humidity with one decimal place. To force a value, use the slider or type the
input value for temperature or relative humidity and then press the button
.
Fig. 42
– Diagnostics parameters
In the example shown on the screen below, the value of 18 °C is being forced in the temperature field, while the relative humidity value is being
read directly from the sensor. The other psychrometric properties are calculated by the
RHT
Climate
Transmitter
based on these values. Note that
the button that was used for forcing temperature changed to
.
Fig. 43
– Diagnostics Input Parameters
